FEP(F46),PTFE(F4) Fluorine-lined butterfly valves are applicable for -50℃~150℃ nitrohydrochloric acid,sulfuric acid,hydrochloric acid,hydrifluoric acid of vanous concentrations and vanous organic acid, strongacid and strong oxidant.
Fluorine lined diaphragm valve is a special form of cut-off valve, appeared in the 1920s.Its opening and closing parts is a diaphragm made of soft material, the valve body cavity and valve cover cavity and drive parts separated, so called diaphragm valve.
Fluorine-lined gate valves are a type of valve.The opening and closing part of the fluorine lined gate valve is the gate, whose motion direction is perpendicular to the fluid direction. The gate valve can only be fully opened and closed, and cannot be adjusted or throttled.
Aluminum alloy characteristic ability of high temperature butterfly valve, apply pressure range is higher also, nominal valve size is big, the body is made of carbon steel, the valve plate seal aluminum ring is used to replace the rubber ring, apply to the hvac, central air conditioning, fluctuation of complete sets of equipment, lack of applicatio1
Knife gate valve, also known as knife gate valve or knife slurry valve, was introduced into China in the 1980s. It has a wide range of applications, from coal preparation, gangue discharge, slag discharge in mines and power plants, to sewage treatment in cities, form slurry transportation in cement and paper mills to professional pipelines such as 1
Dark rod knife gate valve is installde by valve stem. There is no lifting action when the valve stem is opened and closed, which saves installation space. Manual knife gate valve can only be fully opened and closed, can not be adjusted and throttled.
Sporal gate is used for top, bottom and import and export of building materials, metallurgy, mining, elextric power, chemical industry, glass, light industry, grain and other industries.
Main materials of Z15W bronze buckle gate valve are tin bronze C83600, aluminum bronze C95800 and nickel aluminum bronze C95500, etc. The packing and seat seal are made of polytetrafluoroethylene and fluororubber, and the manufacturing standard of internal thread is G thread, BSP thread and NPT thread.Suitable medium: suitable for fresh water, seaw1
Bronze globe valves are valves with a shutoff valve (disc) moving along the center line of the seat.Depending on this movement of the disc, the variation of the seat orifice is proportional to the disc travel.Due to the relatively short stem opening or closing stroke of this type of valve, and the very reliable cutting function, and the seat port c1
Internal thread gate valve, also known as closure door, is the most widely used one of the valves, belongs to the forced sealing valve, its closure principle is, depending on the pressure of the valve bar, the disc sealing face and seat sealing face tight fit, to prevent the flow of media.It is divided into several categories in different ways.The 1
Internal screw swing check valves refer to opening and closing parts by the flow of media and force to open or close, in order to prevent the media backflow of the valve.
X43W|X43T type plug valve is suitable for opening and closing of water, oil, gas and other medium pipelines with nominal pressure of 0.6-1.0mpa and temperature ≤100℃
Plug valves are shutoff or plunger shaped rotary valves that open or close a valve by rotating 90 degrees so that the port on the plug is identical to or separate from the port on the body.