Our ideal rubber flexible Joints (Rubber Joint) ,widely used for water,air,oil and so on, low initial cost and maximum reliability are a must.
-
KXT-A Flexible Rubber Joint
XUVAL rubber expansion joints are flexible connectors made from natural or synthetic elastomers in which special fabrics are embedded to provide physical reinforcement. rubber expansion joints provide a proven and flexible solution to accommodate many types of movements and requirements of industrial plant and equipment.
-
WTX Flexible Rubber Joint
XUVAL Flexible rubber elbow ferred to as rubber elbow, is composed of fabric reinforced rubber parts and flat joints, loose sleeve metal flange or threaded pipe flange, used for pipe vibration isolation and noise reduction, compensation of displacement elbow.
-
-
JXF Flexible Dirt Filtration Expansion Joint
Expansion joint is pumps, valves, pipes and other devices connected to the pipeline of new products, connected by the bolt, to make it as a whole, and has certain displacement, so you can at the time of installation and maintenance, according to the on-site installation size adjustment, at work, can put the axial thrust and also to the whole pipeli1
-
JDX Reducing Rubber Joint big and small joint
ANSI/ASME rubber expansion joints come in diameters from 1" to 152", and can be made with any elastomer material. Because single, double, and triple arch models are available, various movement requirements can be met. Non-standard designs are manufactured as required.
-
KXT-S Flexible Dual Spherical Rubber Joint
XUVALdouble sphere rubber expansion joints are designed for piping systems to absorb pipe movements, relieve stress, reduce system noise/vibration, compensate for misalignment/offset and to protect rotating mechanical equipment against start-up surge forces. XUVAL double sphere rubber expansion joints are inherently stronger than the conventional h1
-
VSSJAFC(CC2F) Detachable double flange transmission joint
VSSJAFC type detachable double flange force transmission joint is composed of loose sleeve expansion joint, short pipe flange, force transmission screw and other components. It can transfer the pressure thrust of the connected parts (blind plate force) and compensate for pipeline error, and cannot absorb axial displacement.Important for pump, valve1
-
JZBW Damping corrugated hose
The ripple compensator belongs to a compensation element.The effective expansion and deformation of the bellows of the working body is used to absorb the size changes caused by thermal expansion and cold contraction of pipelines, conduits and containers, etc., or to compensate the axial, transverse and angular displacements of pipelines, conduits a1
-
VSSJA-2(B2F) Double Flange Limited Expansion Joint
The double flange limit expansion joint is composed of main parts such as body, sealing ring, gland and extension shortening pipe.On the basis of the original performance of the loose sleeve expansion joint, a limit device was added, and the maximum expansion was locked with a double nut.The pipe can expand and contract freely in the allowed expans1