30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Cast iron non rising stem gate valve 150lb
Competitive Advantage: 1. 18 Months Guarantee for quality. 2.OEM manufacturer, print client’s LOGO on the valve body. 3.Offer Operation Manual & Install Introduction for safety use. 4.Offer manufacturer’s reasonable price to win the market for both. 5.Accept any the third party inspection. 6.As a factory, every production process can be control1
-
Ductile iron soft seal non rising stem gate valve
Competitive Advantage: 1. 18 Months Guarantee for quality. 2.OEM manufacturer, print client’s LOGO on the valve body. 3.Offer Operation Manual & Install Introduction for safety use. 4.Offer manufacturer’s reasonable price to win the market for both. 5.Accept any the third party inspection. 6.As a factory, every production process can be control1
-
Cast iron rising stem rubber seat gate valve 125lb
Competitive Advantage: 1. 18 Months Guarantee for quality. 2.OEM manufacturer, print client’s LOGO on the valve body. 3.Offer Operation Manual & Install Introduction for safety use. 4.Offer manufacturer’s reasonable price to win the market for both. 5.Accept any the third party inspection. 6.As a factory, every production process can be control1
-
Cast iron remote control float valve 100X
Competitive Advantage: 1. 18 Months Guarantee for quality. 2.OEM manufacturer, print client’s LOGO on the valve body. 3.Offer Operation Manual & Install Introduction for safety use. 4.Offer manufacturer’s reasonable price to win the market for both. 5.Accept any the third party inspection. 6.As a factory, every production process can be control1
-
Cast iron Flanged Foot Valve PN16
The bottom valve,also known as the reverse stop valve, is a low-pressure plate valve, whose function is to ensure the single flow of liquid in the suction pipe, so that the pump works normally when the pump stops working for a short time, so that the liquid can not return to the water tank, and the suction pipe is filled with liquid to facilitate t1
-
Cast iron dual plate check valve PN16
Competitive Advantage: 1). 18 Months Guarantee for quality. 2).OEM manufacturer, print client’s LOGO on the valve body. 3).Offer Operation Manual & Install Introduction for safety use. 4).Offer manufacturer’s reasonable price to win the market for both. 5).Accept any the third party inspection. 6).As a factory, every production process can be c1
-
Cast iron angle globe valve 10k
Competitive Advantage: 1. 18 Months Guarantee for quality. 2.OEM manufacturer, print client’s LOGO on the valve body. 3.Offer Operation Manual & Install Introduction for safety use. 4.Offer manufacturer’s reasonable price to win the market for both. 5.Accept any the third party inspection. 6.As a factory, every production process can be control1
-
Cast iron flange butterfly valve PN16
XUVAL centric butterfly valves with fixed liner feature an outstanding seating concept. The rubber is injection molded directly on the valve body forming a permanent bond. Consequently, there is no risk of deformation or dislocation of the liner making the valves suitable under vacuum conditions. The combination of the profiled disc edge and the ex1
-
Gate valve flange end ANSI CLASS 150 300
Gate Valve mainly has Thread 200WOG Gate Valve, API600 Flange ends Gate Valve, DIN F4/F7 Stainless Steel Flange ends Gate Valve, Carbon Steel Bellow Seal Gate Valve, Forged Steel A105 Gate Valve, 800LB Thread ends Gate Valve, F11/F22/F51 1500LB Flange ends Gate Valve, Butt Welded Gate Valve, Pressure Sealed Socket Welded Gate Valve, Flange ends 2501
-
Gate valve flange end JIS10K 20K
Gate Valve opens shuts is the damper plate, the damper plate heading and the fluid direction is vertical, the gate valve only can do all starts with the entire pass, cannot make the adjustment and the throttle. The damper plate has two packing surfaces, but the most commonly used pattern gate valve two packing surfaces form, the wedge-shaped angle 1
-
1-PC Hex ball valve thread end
A piece of internal thread ball valve and flange ball valve is the same type of valve, the difference in its close is a ball, the ball around the center line of the body for rotation to open, close a valve.The ball valve in the pipeline is mainly used to cut off, distribution and change the flow direction of the medium.Wide ball valve is a new type1
-
1-PC Ball valve thread end direct mounting pad
A piece of ball valve and flange gate valve are the same type of valve, the difference is that its closure is a ball, the ball rotates around the center line of the valve body to achieve the opening and closing of a valve. Ball valve is mainly used to cut off, distribute and change the flow direction of medium in pipeline. Wide ball valve is a new 1
-
-
-
DIN AWWA JIS BS JKR PN16 Double Orifice air valve
Double port exhaust valve, also known as double port exhaust valve.It is suitable for the industrial medium as water pipeline, as a rapid removal of gas in the pipeline equipment.It is also a necessary equipment to improve the efficiency of water transport equipment and protect the pipeline from deformation and fracture.
-
ANSI 150LB Cast Iron Globe Valve
ANSI 150LB Globe valve also known as the door valve, belongs to the forced sealing valve, so when the valve is closed, must apply pressure to the disc, in order to force the sealing surface leakage.When the medium under the disc into the valve, the operating force to overcome the resistance, is the friction of the valve stem and packing and by the 1
-
JIS 10K Cast Iron Flange Globe Valve
JIS 10K Globe valve also known as the door valve, belongs to the forced sealing valve, so when the valve is closed, must apply pressure to the disc, in order to force the sealing surface leakage.When the medium under the disc into the valve, the operating force to overcome the resistance, is the friction of the valve stem and packing and by the pre1
-
DIN PN16 Cast Iron Ball Check Valve
Check valve is also called reverse flow valve, check valve, back pressure valve, check valve.This kind of valve depends on the flow of the medium itself in the pipeline and automatically open and close the force, belongs to a kind of automatic valve.
-
H42 Vertical lift flanged check valve
Flange check valve is to rely on the flow of the medium itself and automatically open, close disc, used to prevent the medium backflow valve, also known as the check valve, one-way valve, reverse flow valve, and back pressure valve.
-
ANSI Class150 Class300 Stainless steel Flange globe valve
The opening and closing parts of the stainless steel flange globe valve are plug shaped disc, sealing surface is flat or conical surface, disc along the center line of the seat for linear motion.Stem movement, (common name: dark stem), also can be up and down rotary stem type, (common name: rising stem) globe valve refers to the closing member (dis1
-
ANSI 150LB Stainless steel wafer check valve
Stainless steel sandwiched check valve is also known as reverse flow valve, check valve, back pressure valve, one-way valve.This kind of valve depends on the flow of the medium itself in the pipeline and automatically open and close the force, belongs to a kind of automatic valve.
English
NO.139,Xianghe Road,Fangbu Industrial Zone,Tonglu,Hangzhou,China
