30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Flange iron non rising stem gate valve
Gate valve refers to a valve whose opening and closing body (valve plate) is driven by the valve stem to lift the sealing surface of the valve seat, which can connect or cut off the passage of fluid. When the valve is partially opened, eddy currents are generated on the back of the gate, which can easily cause erosion and vibration of the gate, and1
-
Q41F-20T flange ball valve
The brass ball valve evolved from the plug, and its opening and closing parts act as a ball, using the ball to rotate 90 degrees around the axis of the valve stem to achieve the purpose of opening and closing. It has the characteristics of fast opening and closing, lightweight, simple structure, small volume, good sealing performance, and low fluid1
-
Bellow Sealed Globe Valve
This product is suitable for the opening, circulation, and cut-off of pipeline fluids. The suitable medium is non corrosive fluids such as water, steam, and oil. The operating temperature is -30-300 degrees Celsius.
-
Brass water pipe gate valve
Gate valve refers to a valve whose opening and closing body (valve plate) is driven by the valve stem to lift the sealing surface of the valve seat, which can connect or cut off the passage of fluid. When the valve is partially opened, eddy currents are generated on the back of the gate, which can easily cause erosion and vibration of the gate, and1
-
DQ41F-40P low-temperature ball valve
Low temperature ball valves are suitable for the management system of low-temperature liquid storage and transportation equipment, with the characteristics of flexible switching and reliable sealing. They can also be used for other low-temperature and cryogenic medium management systems.
-
PZ41H slag discharge gate valve
The slag discharge gate valve is suitable for cutting off or connecting the medium in the pipeline of the slurry discharge system of thermal power plants and hydraulic engineering. The suitable medium is the ash water mixture, and the slag water ratio of the slag water mixture is ≥ 1:15. Slag discharge gate valve PZ41H PN10~PN63: manual, flange con1
-
Single clip LT handle butterfly valve
The difference between a single clip LT type center line butterfly valve and a double clip center line butterfly valve is that the flange around the valve body has threaded holes. This product can be used for clamp connections between pipelines, as well as for connections between pipeline ends, for emptying pipeline media. This product has good val1
-
Q41F Soft Seal Ball Valve
The Q41F soft sealed ball valve not only has a simple structure and good sealing performance, but also has a small volume, light weight, low material consumption, small installation size within a certain nominal diameter range. It also has a small driving torque, simple operation, and is easy to achieve fast opening and closing. It is one of the fa1
-
Low temperature butterfly valve
Low temperature valves refer to valves that can be used under low temperature conditions. Valves with operating temperatures below -40 ℃ are usually referred to as low-temperature valves. Low temperature valves include low-temperature ball valves, low-temperature gate valves, low-temperature globe valves, low-temperature butterfly valves, low-tempe1