30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
DQ41F-16P Low Temperature Ball Valve
Low temperature valves refer to valves that can be used under low temperature conditions. Valves with operating temperatures below -40 ℃ are usually referred to as low-temperature valves. Low temperature valves include low-temperature ball valves, low-temperature gate valves, low-temperature globe valves, low-temperature butterfly valves, low-tempe1
-
Single eccentric clamp handle butterfly valve
Our company has introduced advanced valve manufacturing technology from abroad and used a unique "floating seal" principle to produce butterfly valves, which completely solves the possibility of valve leakage and can reduce the friction resistance and operating torque of the sealing chamber seat. It can be widely used as a cut-off and regulating fu1
-
GQ47H Rail Ball Valve
Compared with traditional ball valves, track ball valves, whether floating or fixed, always have contact between the ball and the valve seat, resulting in high switching torque and easy damage to the sealing surface. When the red valve track ball valve is opened and closed, the ball first deflects -8 degrees and then rotates. During the entire open1
-
J41H forged steel globe valve
J41H forged steel flange globe valve refers to a valve where the closing part (disc) moves along the centerline of the valve seat. According to the movement of the valve disc, the change in the valve seat opening is directly proportional to the valve disc stroke. Due to the relatively short opening or closing stroke of the valve stem and the highly1
-
WJ41H bellows globe valve
The WJ41H and WJ41Y steam bellows globe valves, also known as bellows sealed globe valves, are designed with automatic roll welding to form a metal barrier between the fluid medium and the atmosphere, ensuring zero leakage of the valve stem.
-
Manual welding connection ball valve
Product Name: Manual Welding Connection Ball Valve Connection form: Welding Structural form: Floating ball valve Nominal diameter: 10-900 (mm) Applicable media: water, steam, oil, nitric acid, acetic acid, oxidizing media, etc. Pressure environment: atmospheric pressure Working temperature: room temperature Standard: National Standard
-
Manual steel ball valve
Product Introduction: Manual ball valve is a relatively new type of ball valve, which has some unique advantages of its own structure, such as no friction on the switch, less wear on the seal, and small opening and closing torque. This can reduce the specifications of the equipped actuator. Equipped with a multi turn electric actuator, it can achie1