30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Stainless steel Manual Open-rod Knife Gate Valve
Knife gate valve, also known as knife gate valve or knife slurry valve, was introduced into China in the 1980s. It has a wide range of applications, from coal preparation, gangue discharge, slag discharge in mines and power plants, to sewage treatment in cities, form slurry transportation in cement and paper mills to professional pipelines such as 1
-
100D fixed water level valve
Product overview of 100D fixed water level valve: 100D fixed water level valve is a diaphragm valve that adjusts the height of the liquid level of the water tank and water tower. The fixed water level valve is controlled by a floating ball. When the liquid level reaches the set height, the valve transmits a signal to the water pump through the rele1
-
BQ41F/PPL Stainless Steel Insulation Ball Valve
Brief introduction of insulation valve structure: Insulation valves are welded with a metal jacket on the valve body. Steam, heat-conducting oil, cooling water, air-conditioning, etc. are injected into the metal jacket so that the medium of the valve body can meet the requirements under the conditions of normal temperature, heating, and cooling. Th1
-
Water seal gate valve
Product introduction: Water seal gate valve is suitable for opening and closing devices on pipelines with nominal pressure of 100MPa, working temperature of 425°C, and working medium of water, steam, oil and non-corrosive gas. It is especially suitable for steam turbine vacuum condensing systems in thermal power plants.
-
Manual plum type knife gate valve PZV43H
Precautions and models in the use of manual knife gate valve products: It entered my country from the 1980s. In less than two decades, its use has expanded from the general field to a wider variety of industries. Coal preparation, gangue discharge and slag discharge from mining power plants. It has developed to urban sewage treatment, and has devel1
-
-
Carbon steel flange gate valve
Definition of cast steel gate valves: Cast steel gate valve: refers to all gate valves cast from metal steel materials and processed into castings, collectively known as cast steel gate valves. Corresponding to cast steel gate valves are cast iron gate valves, forged steel gate valves, and malleable cast iron gate valves.
-
BJ41W and BJ41Y insulation globe valves
Product Description BJ41W and BJ41Y insulated globe valves come in three cover designs. The first type is a bolt type valve cover, which is designed according to this design form. The valve body is connected to the valve cover with bolts and nuts, and is sealed with a spiral wound gasket (made of 316 clamp flexible graphite). When customers have sp1
-
JM744X quick opening mud discharge valve
The quick opening sludge discharge valve is usually installed on the outer wall of the bottom of the sedimentation tank to remove sediment and dirt from the bottom. The valve is divided into two chambers by a reinforced nylon rubber diaphragm. It is operated by a pneumatic or hydraulic source as the actuator, and is controlled by an electric or man1