The difference between a single clip LT type center line butterfly valve and a double clip center line butterfly valve is that the flange around the valve body has threaded holes. This product can be used for clamp connections between pipelines, as well as for connections between pipeline ends, for emptying pipeline media. This product has good valve body rigidity and can withstand high pipeline pressure, especially suitable for places with high safety factors, such as gas chemical and power plant industries.
Item NO.:
XUVAL88-286Lead Time:
50 DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTMOQ:
11. Product features
The axle plate is connected without pins, with a lightweight structure and convenient transportation, installation, and maintenance
90 ° opening and closing, quick opening and closing, small operating torque, labor-saving and lightweight
Soft sealing, zero leakage, long service life
Equipped with flange threads, the valve body has high strength
Using different component materials, suitable for different media
Surface epoxy resin coating, anti-corrosion and aesthetically pleasing
2. Product features
Entry Name | Adopting standards | Optional standards |
Design and manufacturing acceptance | GB/T 12238-2008 | ISO/DIN10631、API598 |
Valve structure length | GB/T 12221-2005 | ISO5752 |
Valve flange connection | GB/T 9113-2010 | ANSI B16.5、JIS B2238 |
Valve sealing test | GB/T 13927-2008 | ISO/DIN5208 |
3. Performance parameters
Product Name: Single Clamp LT Handle Centerline Butterfly Valve
Connection type: single clip type
Nominal diameter: DN50-DN150
Nominal pressure: PN10/PN16
Test pressure: Shell test: nominal pressure × 1.5x
Sealing test: nominal pressure × 1.1x
External spraying: epoxy resin coating
Drive type: streamlined aluminum handle, high-strength Ma steel handle, stamped steel handle
Applicable temperature: -30~180 ℃
Applicable media: water, salt, acid, alkali, natural gas, air, alcohols, oils, food, steam, etc
4.Optional materials for components
Part Name | Optional Material |
Valve body | Gray cast iron (CI), Ductile iron (DI) |
Valve plate | Ball milled cast iron coated with nylon (N), Ductile iron electroplated (D), CF8 (P), CF8M (R), Duplex steel (S), Aluminum bronze (T) |
Valve seat | EPDM, NBR, PTFE, VITON, SEP, heat-resistant EPDM, wear-resistant EPDM |
Valve shaft | 45 # chrome plated, stainless steel SS416, stainless steel SS304 |
Handle | Aluminum alloy, malleable steel, steel plate |
5. Outline dimension diagram
mm | in | H | H1 | A | L | ΦD | n-M | Φ |
DM50 | 2" | 210 | 58 | 175 | 42 | 125 | 4-16 | 70 |
DN65 | 2.5" | 230 | 58 | 175 | 45 | 145 | 4-16 | 70 |
DN80 | 3" | 256 | 58 | 175 | 45 | 160 | 8-16 | 70 |
DN100 | 4" | 293 | 68 | 220 | 52 | 180 | 8-16 | 92 |
DN125 | 5" | 319 | 68 | 220 | 55 | 210 | 8-16 | 92 |
DN150 | 6" | 340 | 68 | 220 | 55 | 240 | 8-20 | 92 |
6. Installation precautions
1. The pipeline flange must comply with the valve pressure standard, and it is recommended to use butterfly valve specific flanges for clamp butterfly valves.
2. Before use and installation, check whether the usage conditions match the performance of this butterfly valve.
3. Before installation, the valve chamber and sealing surface should be cleaned to prevent dirt from adhering. Before using new pipelines, the valve should be opened and the pipeline should be cleaned with air or water before use.
4. The two ends of the valve seat protrude from the valve body end face as flange sealing gaskets, and the sealing gasket cannot be added during the installation of butterfly valves.
5. Butterfly valves can be installed on pipelines at horizontal, vertical, and any angle, and can be used in both directions; Butterfly valves shall not be installed at the corners of pipelines and shall not be installed upside down.
6. When installing, the butterfly valve should be in the closed position to ensure that the butterfly plate does not collide with the pipeline flange, etc.
7. Confirm that the flange welding is correct, and it is not allowed to weld the flange again after the butterfly valve is installed.
8. If the butterfly valve is found to have abnormal opening and closing, the cause should be identified and the fault should be eliminated; Do not use methods such as knocking, smashing, prying, and extending the handle extension to forcefully open and close.
9. During transportation and storage of butterfly valves, the butterfly plate should not collide with hard objects and should be opened at a position of 8-10 ° to ensure that the sealing surface is not damaged during this period.
10. If the LT butterfly valve is used at the end of the pipeline, please specify it in the order.
If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported