Power station gate valve
Product Introduction:
Product Name: Power Station Gate Valve
Product model: Z960Y
Nominal diameter: NPS 2 "~20" DN50~500mm
Nominal pressure: Class900~2500Lb PN150~20MPa
Main materials: carbon steel, alloy steel
Applicable temperature: -29 ℃~+600 ℃
Drive mode: manual, pneumatic, electric
Design standards: API 600, ASME B16.34, DL/T 531, JB/T3595
Structural length: DL/T 531, ASME B16.10, GB/T 12221
Connection standards: DL/T 531, JB/T3595, ASME B16.25
Pressure test: API 598, GB/T 13927, JB/T 9092
Pressure temperature rating: API 598, GB/T 13927, GB/T 26480, JB/T9092, JB/T3595
Item NO.:
XUVAL-417
Lead Time:
45
Product Orgin:
China
Brand:
XUVAL
Shipping Port:
Shanghai
Payment:
100%
Color:
blue
MOQ:
1
Products Details
Opening process
1. In the closed position, the valve body is mechanically pressed against the valve seat by the valve stem.
2. When the handwheel is turned counterclockwise, the valve stem moves in the opposite direction, and its bottom angular plane causes the ball to detach from the valve seat.
3. The valve stem continues to lift and interacts with the guide pin in the spiral groove of the valve stem, causing the ball to start rotating without friction.
4. Until it reaches the fully open position, the valve stem is lifted to the limit position, and the ball rotates to the fully open position.
Closing process
1. When closed, rotate the handwheel clockwise to lower the valve stem and allow the ball to rotate away from the valve seat.
2. Continuing to rotate the handwheel, the valve stem is subjected to the action of a guide pin embedded in its spiral groove, causing both the valve stem and the gate to rotate 90 degrees simultaneously.
3. When it was about to close, the gate had already rotated 90 degrees without contact with the valve seat.
4. During the last few turns of the handwheel rotation, the angular plane at the bottom of the valve stem mechanically wedges against the pressure ball, tightly pressing it against the valve seat to achieve complete sealing.
Valve characteristics
1. The valve chamber adopts a pressure self tightening sealing structure, which has good sealing performance.
2. The sealing surfaces of the valve disc and valve seat are made of cobalt based hard alloy overlay welding, which is wear-resistant, high-temperature resistant, with good scratch resistance and long service life.
3. The valve stem has undergone anti-corrosion nitriding treatment, which has good corrosion resistance and scratch resistance.
4. High temperature creep resistant design.
5. The depth of the valve cover packing box is reasonable, and corrosion inhibitors are added to the packing, ensuring reliable sealing.
6. The valve has an upper sealing structure to ensure that there is no leakage at the valve stem during valve opening and operation.
7. The valve driving methods include manual, gear transmission, and electric, which can achieve remote control and automation requirements.
Send A Message
If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.