The quick opening sludge discharge valve is usually installed on the outer wall of the bottom of the sedimentation tank to remove sediment and dirt from the bottom. The valve is divided into two chambers by a reinforced nylon rubber diaphragm. It is operated by a pneumatic or hydraulic source as the actuator, and is controlled by an electric or manual two position four way directional valve to form a pressure difference between the upper and lower chambers, thereby achieving rapid opening and closing, and achieving the purpose of sludge discharge. This valve has frictionless movement and is suitable for granular media such as mud.
Item NO.:
XUVAL33-222Lead Time:
45 DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTMOQ:
10
Main technical parameters | |
Nominal pressure | 0.6~1.0Mpa |
Applicable Medium | Water, dirt |
Minimum driving pressure | 0.15Mpa |
Drive medium | Water and gas |
Temperature | 0~80℃ |
Flange standard | GB/T17241.6、JB/T79.1 |
Test standards | GB/T13927 |
Previous :
H44H Steel Swing Check Valvenext :
Two way check valveIf you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported