A41H type are used for the equipment and pipeline of the petroleum gas, air, water etcmedium what the working temperature are less than 300C A41Y-P/R type are used for theequipment and pipeline of the quality with corrode medium what the working temperature areess than 200C Take for extra pressure devices. Flange connecting dimensions o1
Y-type filters are usually installed at the inlet end of hydraulic control valves and other equipment to prevent particle impurities from entering the channel, causing blockage and preventing normal use of the equipment. They are essential filtering equipment for precision mechanical products that are prone to blockage. The Y-shaped filter has a si1
The ZSJZ series water flow indicator is used for automatic sprinkler water extinguishing systems. It can be installed on the main water supply pipe or branch pipe to provide an electrical signal of water flow in a certain area. This electrical signal can be sent to the electric control box or used to start the control switch of the fire pump. The w1
The 200X pressure reducing valve mainly controls the outlet pressure of the main valve by adjusting the pressure reducing pilot valve. The outlet pressure of the main valve does not change due to changes in inlet pressure and flow rate. The outlet pressure is safely and reliably maintained at the set value of the pilot valve, and the set value can 1
The exhaust valve is used for pipeline exhaust in independent heating systems, centralized heating systems, heating boilers, central air conditioning, floor heating, and solar heating systems. Because water usually contains a certain amount of air, and the solubility of air decreases with the increase of temperature, gas gradually separates from th1
The automatic exhaust valve has the advantages of beautiful appearance, stable performance, convenient installation and maintenance, no power consumption, and energy conservation. Widely used in hot water heating systems, hot water heating pipeline systems, air conditioning cold water systems, water treatment systems, hot water boiler room piping s1
The electric flange gate valve is equipped with a multi turn electric actuator in the gate valve body, which makes the valve plate move up and down in a straight line, achieving remote control of the valve position switch, making it convenient and fast. Electric flange gate valves are suitable for remote control of valve position switches on pipeli1
SSDF-1 water mounted bottom valve 1、 Overview Each water pump needs to be equipped with a bottom valve, which is usually installed below the water surface, while the above water bottom valve is installed above the water surface. It is a replacement product of the old bottom valve and is an ideal water diversion equipment and can also replace vacuum1