Water type bottom valve
SSDF-1 water mounted bottom valve
1、 Overview
Each water pump needs to be equipped with a bottom valve, which is usually installed below the water surface, while the above water bottom valve is installed above the water surface. It is a replacement product of the old bottom valve and is an ideal water diversion equipment and can also replace vacuum pumps and vacuum pumping devices.
Item NO.:
XUVAL33-263
Lead Time:
50 Days
Product Orgin:
CHINA
Brand:
XUVAL
Shipping Port:
Shanghai
Payment:
100%TT
MOQ:
2
Products Details
The bottom valve has a reasonable design, advanced manufacturing technology, and is easy to install, use, and maintain. And it has friction,With the advantages of low resistance, long service life, and energy conservation, it is widely used as a water pump supporting facility in industries such as petrochemical, chemical, textile, printing and dyeing, metallurgy, mining, and drainage and irrigation.
2、 Characteristics
1. It can replace the underwater bottom valve, be installed at the 90 ° bend between the horizontal pipe and the inlet pipe above the water surface, or replace the elbow. Its sealing performance is unique, achieving no leakage and equipped with a damping device, which has a certain mitigating effect on the harm of water hammer.
2. The energy-saving effect is significant, which can save about 5-7% of energy during normal work and use (based on kiloton/meter of electricity consumption). After one to two years of use, the saved electricity cost can be recovered from the investment cost of purchasing this valve. Its energy-saving effect is not achievable by ordinary bottom valves.
3. Long service life and convenient maintenance. The bottom valve has a service life of more than five years, greatly reducing production costs. Generally, there are no faults during the service life, and even if there are faults, the handling is extremely convenient and fast. It fully demonstrates its superiority.
4. The self priming performance is reliable. As is well known, the sealing performance of old style bottom valves is poor, and there is often a problem of not being able to discharge water after stopping the pump. However, the above water bottom valve has a unique sealing effect, which can achieve no leakage and ensure the smooth operation of the next pump start. Therefore, in the design process, it is not necessary to consider choosing the water supply engineering scheme of the underwater pump house with a high investment due to not discharging water during the pump start.
5. All connecting flanges of this product comply with GB regulations and have good universal performance.
3、 Instructions for use
1. Specifications: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN400, DN500, DN600, DN700, DN800, DN900, DN1000, and other specifications.
2. Nominal pressure: 0.6-1.6MPa
3. Installation requirements: Install at the turning point between the vertical and horizontal pipes of the water pump suction pipe, and ensure its vertical state during installation.
4. Start: Immediately after filling the horizontal pipe with water before the first start, causing a semi vacuum inside the suction pipe, the water is sucked into the vertical pipe to complete the pumping process. When the suction head is too large, it is necessary to repeat the water filling start several times, and then stop the pump. There is no need to fill the water before starting the pump.
5. Maintenance: Generally, maintenance is not necessary for use. When maintenance is required, simply open the valve cover above the water bottom valve and replace the rubber gasket. After maintenance, start the pump according to the method of starting the pump for the first time.
6. If used in fluids with high acid and alkali concentrations, please choose a stainless steel material for the above water bottom valve
Send A Message
If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.