Temperature control valve adopts advanced processor, through the temperature control valve internal sensor, detect the indoor temperature and then according to the difference between the measured room temperature and the set value, determine the on-off ratio of the on-off valve in a control cycle, and according to this on-off ratio to control the on-off regulator, in order to adjust the heat into the room, while recording and statistics of the on-off control valve on time. The measured 1 hour is the unit average temperature, the total time of opening the valve, and various states are saved. Finally, the data is transmitted to the management system through the wireless network according to the heating area of each household, the measured average temperature and the on-off time ratio of the heat allocation of the whole building, the installation is simple, no power supply air source is required, when the temperature of the controlled medium changes, the temperature sensing liquid volume in the sensor expands or contracts. When the temperature of the controlled medium is higher than the set value, the temperature-sensing liquid expands, pushes the spool downward to close the valve, and reduces the flow of the heat medium; When the temperature of the controlled medium is lower than the set value, the temperature-sensing liquid shrinks, and the reset spring pushes the valve core to open, increasing the flow of the heat medium.
Item NO.:
Xuval-399Lead Time:
45Product Orgin:
ChinaBrand:
XUVALShipping Port:
ShanghaiColor:
BlueMOQ:
1next :
Impeller mirrorIf you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported