The groove type (clamp) connecting valve is a series of new connecting valves designed and manufactured by introducing advanced products from the United States and Germany. It has the advantages of fast, simple, safe, reliable installation, unrestricted installation site, and easy maintenance of pipelines and valves. Widely used in water supply and1
The HH49X micro resistance slow closing butterfly check valve is mainly used in the supply and drainage pipelines of clean water, source water, sewage, seawater, and other media. It is installed at the outlet of the water pump to cut off the backflow of the media and eliminate atomic energy damaging water hammer, protecting the safe operation of th1
Features: The angle type waterproof hammer air valve is composed of an angle type air valve and an exhaust throttling device. The micro exhaust valve is integrated into the angle type air valve. It integrates functions such as high-speed exhaust without blowing and blocking to prevent valve closing water hammer, throttling exhaust to ensure safe wa1
1、 Overview Each water pump needs to be equipped with a bottom valve, which is usually installed below the water surface, while the above water bottom valve is installed above the water surface. It is a replacement product of the old bottom valve and is an ideal water diversion equipment and can also replace vacuum pumps and vacuum pumping devices.1
The difference between a single clip LT type center line butterfly valve and a double clip center line butterfly valve is that the flange around the valve body has threaded holes. This product can be used for clamp connections between pipelines, as well as for connections between pipeline ends, for emptying pipeline media. This product has good val1
Product features and usage: HTGLF47HR-10.16.25 series pipeline self operated control valve, also known as pipe operated valve. It is developed on the basis of absorbing micro resistance slow closing check valves, hydraulic control check butterfly valves, and multifunctional hydraulic control valves, and is a new generation product of water pump con1
The hand cranked brush type filter is suitable for various water supply systems, process water systems, and industrial cooling water systems, especially non-stop systems that operate continuously 24 hours a day. It can filter out various solid impurities in water, ensuring the safe and reliable operation of system equipment. The filter has a reason1
Natural gas flame arresters are designed and manufactured based on the principle that flames extinguish due to heat loss when passing through narrow pores in thermal conductors. Suitable for storage and flare systems, gas purification systems, gas analysis systems, coal mine gas emission systems, heating furnace fuel gas pipelines for combustible g1