Electronic electric angle type high pressure regulating valve is the electric actuator of electric unit combination instrument.
Item NO.:
XU146Lead Time:
45DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTColor:
BlueMOQ:
50Electronic electric angle type high pressure regulating valve is the electric actuator of electric unit combination instrument.Mainly used for high pressure, high temperature and high pressure pipeline.It can change the flow rate of fluid medium (liquid, gas, gas-liquid mixture, steam), so as to achieve the adjustment of process parameters such as medium pressure and flow rate.The main difference between it and ordinary control valve lies in: the use of high temperature and high pressure resistant shell material, the use of high temperature and high pressure resistant, cavitation resistant, air defense valve internals material, the use of more precise manufacturing process.According to the user's specific working conditions, it adopts single-stage and multi-stage depressurization type respectively to reduce the scouring and noise of the fluid as far as possible, so as to achieve the stable adjustment of the fluid and improve the service life of the valve itself.Therefore, the valve has the advantages of complex structure, stable performance, reliable operation, large allowable pressure difference, low noise and tight closing.It has been widely used in petrochemical, power station, smelting and other industrial process automatic regulation and remote control.
Welded type: (with JB2769-92 threaded flange)
Flange type: according to user specified standard
1.JB2766-92 Forging high pressure valve
2.JB/T2768-2778 High pressure valve structure
3.JB/T6323 Power station valve manufacturing technical conditions
Material of main parts
Parts name
Material
Body (forging)
30; 35; 40; 35CrMo; 35CrMoA; 0Cr18Ni9Ti; 0Cr17Ni12Mo2
Spool; Stem; Seat
1Cr18Ni9Ti; 1Cr18Ni9Ti Build welding; Stellite alloy; 17-4PH; SUS440C
Bolt; Nut
35CrMoA
40Cr
Gasket
Flexible graphite clip metal; Reinforced PTFE; 0Cr18Ni9; Red copper
Packing
PTFE; Reinforced PTFE; Flexible graphite
Main technical parameters and characteristics
Nominal diameter
Singlestage
15; 20; 25; 32; 40; 50; 65; 80; 100; 125
Multistage
15; 20; 25; 32; 40; 50; 65; 80
Nominal pressure MPa
16.0; 22.0(25.0); 32.0; 42.0 (JB2766-92)
Nominal pressure LB
CLASS 600; 900; 1500; 2500
Working temperature ℃
-40~550
Inherent flow characteristics
straight line; Equal percentage
Connection mode
Type of upper bonnet
Common type (-40~250℃)
Hot plate type (250~550℃)
According to GB / T4213-92
Singlestage
Single seat: grade VI (bubble drade) Sleeve type: grade IV
Multistage
Grade IV
Actuator drive source
Power on
220V 50HZ
Power off
220V 50HZ
Main executive standards
Main dimensions |
|||||||
Welding type |
mm | ||||||
DN | L1 | L2 |
H |
Dn |
|||
Single stage |
Single stage heat dissipation type |
multi stage |
Multi stage heat dissipation type |
||||
10 | 90 | 165 | 400 | 500 | 550 | 650 | Ø255 |
15 | 105 | 175 | 400 | 500 | 550 | 650 | Ø255 |
20 | 120 | 210 | 400 | 500 | 550 | 650 | Ø255 |
25 | 120 | 210 | 400 | 500 | 550 | 650 | Ø255 |
32 | 155 | 225 | 450 | 560 | 630 | 750 | Ø255 |
40 | 190 | 295 | 480 | 590 | 710 | 830 | Ø255 |
50 | 230 | 320 | 550 | 630 | 780 | 900 | Ø310 |
80 | 300 | 455 | 750 | 850 | 980 | 1125 | Ø310 |
100 | 400 | 565 | 855 | 985 | 1155 | 1355 | Ø310 |
125 | 450 | 655 | 965 | 1255 | 1435 | 1655 | Ø310 |
Main dimensions |
||||||
Flange type |
mm | |||||
DN |
L |
H1 |
Dn |
|||
Single stage |
Single stage heat dissipation type |
Multi stage |
Multi stage heat dissipation type |
|||
10 | 125 | 430 | 550 | 570 | 680 | Ø255 |
15 | 125 | 430 | 550 | 570 | 680 | Ø255 |
20 | 150 | 430 | 550 | 590 | 680 | Ø255 |
25 | 150 | 450 | 580 | 620 | 690 | Ø255 |
32 | 175 | 490 | 590 | 690 | 780 | Ø255 |
40 | 190 | 550 | 690 | 750 | 870 | Ø255 |
50 | 230 | 650 | 730 | 850 | 980 | Ø310 |
80 | 300 | 850 | 950 | 1080 | 1325 | Ø310 |
100 | 400 | 955 | 1185 | 1255 | 1555 | Ø310 |
125 | 450 | 1165 | 1455 | 1535 | 1855 | Ø310 |
Packing & Delivery :
Packing Details : all by seaworthy plywood case and packed strongly by packing belt as below
Delivery Details : Generally it is 5-10 days if the goods are in stock. or 15-30 days if the goods are OEM or not enough subject to the order quantity. But anyway, normally, we are able to make sure the delivery will not exceed 45 days.
If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported