The valve stem of WZ41H corrugated pipe gate valve adopts a double sealing structure of corrugated pipe and packing, ensuring no leakage sealing at the valve stem, especially suitable for pipelines with flammable, explosive, toxic and valuable media. The sealing structure of corrugated pipes is designed reasonably, resistant to fatigue, and has a l1
Low temperature valves refer to valves that can be used under low temperature conditions. Valves with operating temperatures below -40 ℃ are usually referred to as low-temperature valves. Low temperature valves include low-temperature ball valves, low-temperature gate valves, low-temperature globe valves, low-temperature butterfly valves, low-tempe1
The H42Y lifting high-pressure check valve is connected by flanges on the upper and lower valve bodies to the valve disc, and the sealing surface of the valve seat is welded with Stellite alloy. The manufacturing and acceptance conditions shall comply with the provisions of JB450.
A check valve with a high-pressure check valve disc sliding along the vertical centerline of the valve body. Internal threaded check valves can only be installed on horizontal pipelines. On high-pressure small diameter check valves, a ball can be used as the disc. The valve body shape of a butterfly check valve is the same as that of a globe valve 1
The electric single seat regulating valve is composed of a series of electronic electric actuators (intelligent integrated actuators) such as 3810L/PSL and a single seat regulating valve. The electronic electric actuator is equipped with a built-in servo system, without the need for an additional servo amplifier. It can be controlled for operation 1
The electric high-pressure cage type regulating valve adopts a cage type throttling form to distribute pressure difference, reducing cavitation, erosion, and flow damage, greatly improving the service life of the regulating valve, especially when used in urea systems, which is 2-3 times longer than ordinary high-pressure valves. The valve body is a1
Compared with traditional ball valves, track ball valves, whether floating or fixed, always have contact between the ball and the valve seat, resulting in high switching torque and easy damage to the sealing surface. When the red valve track ball valve is opened and closed, the ball first deflects -8 degrees and then rotates. During the entire open1
A pipeline silencer is a composite sound-absorbing hood with a composite structure of high temperature and high pressure steam, as well as low pressure steam, that enters the secondary pressure reducing body after a one-time expansion and pressure reduction in the silencer, and then forms low pressure or ultra-low pressure steam through a large vol1
Ripple compensator, also commonly known as expansion joint or expansion joint. It is composed of corrugated pipes (a type of elastic element) and accessories such as end pipes, brackets, flanges, and conduits that make up the main body of its work. A corrugated compensator is a type of compensation element that utilizes the effective expansion and 1