Pipeline silencer

ASTM A252 Standard is Specification for Welded and Seamless Steel Pipe Piles EN10219 / EN10210 S275J0H S355J0H ASTM/ASME A252/SA252 steel piling pipe is a structural pipe ideally suited for application in buildings, retaining walls, and other structures needing solid, dependably, quality made steel piling pipe as its structure.

In addition to using steel pipes as raw materials to produce eccentric reducing pipes, some specifications of reducing pipes can also be produced using stamping forming technology using steel plates. The shape of the stamping die used for stretching refers to the design of the inner surface size of the reducing pipe, and the steel plate after cutting is stamped and stretched into shape using the stamping die

The "8" character is a type of pipeline component, mainly for the convenience of maintenance. You can paint the upper half of the "8" character black to determine the specific shape. It's half a blind plate and half an iron ring. Commonly used for pipeline flanges that require process changes, the materials mainly include carbon steel, stainless steel, and alloy, which can be selected based on the pipeline pressure level and pipeline medium.

Out Diameter: 4"-20" Wall Thickness: 3-20mm Length : 3-12m, or according to customer’s requirement End: Plain End, Beveled End, Treaded End Standard: ASTM 5L, ASTM A53, ASTM A178, ASTM A500/501, ASTM A691, ASTM A252, ASTM A672, EN 10217

Pipe cap, also known as head, plug, cap, pipe cap, or blind, is a pipe fitting welded to the pipe end or installed on the external thread of the pipe end to cover the pipe. Used to close pipelines, with the same effect as pipe plugs. The form of blind plates is similar, except that blind plates can be dismantled for sealing, while welded pipe caps cannot be dismantled. The design of the pipe cap includes a convex pipe cap, a conical shell, a reducing section, a flat cover, and a tightening mouth. Convex pipe caps include: hemispherical pipe caps, elliptical pipe caps, dished pipe caps, and spherical crown pipe caps. From the perspective of force, the convex pipe cap gradually becomes less effective than the hemispherical pipe cap, but from the perspective of manufacturing difficulty, it gradually becomes easier to manufacture.

Stainless steel elbows need to be protected according to certain process measures during use and production, to protect the rationality and quality of castings. Production and processing should be carried out according to certain process techniques to protect the quality of stainless steel elbows. The stainless steel elbow is protected by a long nozzle and enters below the liquid level of the ladle. The ladle is sealed with a cover, and the sealing between the long nozzle and the ladle cover is also necessary to protect the sealing performance of the casting. Before injecting water into the stainless steel elbow ladle, the ladle is filled with argon (nitrogen) for about 6 minutes to ensure that the oxygen content inside the ladle is less than 2%. A certain amount of oxygen input is strictly controlled to ensure good performance during use. Through such protection, the oxygen content in stainless steel elbows will remain unchanged or decrease to some extent.

Product features and usage: HTGLF47HR-10.16.25 series pipeline self operated control valve, also known as pipe operated valve. It is developed on the basis of absorbing micro resistance slow closing check valves, hydraulic control check butterfly valves, and multifunctional hydraulic control valves, and is a new generation product of water pump control valves. It combines the functions of an electric gate, an electric butterfly valve, and a check valve, and eliminates water hammer hazards through quick and slow closing actions, protecting the safety of the water pump and pipeline network. This valve is a new type of control equipment for pumping stations with novel structures, advanced performance, and reliable operation both domestically and internationally. It is mainly used in industries such as centrifugal pumps, metallurgy, petrochemicals, water companies, municipal engineering, and environmental protection for automated water supply and drainage pumping stations.

A piece of ball valve and flange gate valve are the same type of valve, the difference is that its closure is a ball, the ball rotates around the center line of the valve body to achieve the opening and closing of a valve. Ball valve is mainly used to cut off, distribute and change the flow direction of medium in pipeline. Wide ball valve is a new type of valve widely used.

Usage environment Suitable for the transportation of clean water or other liquids similar to clean water. Suitable for household water supply, garden watering, etc.