Stainless steel welded pipe cap

ASTM A252 Standard is Specification for Welded and Seamless Steel Pipe Piles EN10219 / EN10210 S275J0H S355J0H ASTM/ASME A252/SA252 steel piling pipe is a structural pipe ideally suited for application in buildings, retaining walls, and other structures needing solid, dependably, quality made steel piling pipe as its structure.

In addition to using steel pipes as raw materials to produce eccentric reducing pipes, some specifications of reducing pipes can also be produced using stamping forming technology using steel plates. The shape of the stamping die used for stretching refers to the design of the inner surface size of the reducing pipe, and the steel plate after cutting is stamped and stretched into shape using the stamping die

The "8" character is a type of pipeline component, mainly for the convenience of maintenance. You can paint the upper half of the "8" character black to determine the specific shape. It's half a blind plate and half an iron ring. Commonly used for pipeline flanges that require process changes, the materials mainly include carbon steel, stainless steel, and alloy, which can be selected based on the pipeline pressure level and pipeline medium.

Out Diameter: 4"-20" Wall Thickness: 3-20mm Length : 3-12m, or according to customer’s requirement End: Plain End, Beveled End, Treaded End Standard: ASTM 5L, ASTM A53, ASTM A178, ASTM A500/501, ASTM A691, ASTM A252, ASTM A672, EN 10217

Stainless steel elbows need to be protected according to certain process measures during use and production, to protect the rationality and quality of castings. Production and processing should be carried out according to certain process techniques to protect the quality of stainless steel elbows. The stainless steel elbow is protected by a long nozzle and enters below the liquid level of the ladle. The ladle is sealed with a cover, and the sealing between the long nozzle and the ladle cover is also necessary to protect the sealing performance of the casting. Before injecting water into the stainless steel elbow ladle, the ladle is filled with argon (nitrogen) for about 6 minutes to ensure that the oxygen content inside the ladle is less than 2%. A certain amount of oxygen input is strictly controlled to ensure good performance during use. Through such protection, the oxygen content in stainless steel elbows will remain unchanged or decrease to some extent.

DYH41X quick closing check valve overview: The quick-closing check valve is mainly composed of body, valve seat, valve stem, spring, valve clack, guide sleeve and other parts. When the pump is turned on, the valve flap rises under the thrust of the water bottom to open the valve, and the spring is quickly closed under the action of the spring force. When the water flow is close to 0, the valve flap is completely closed. The phenomenon of no water backflow, and at the same time, because the water cannot flow back, no kinetic energy is generated, and the occurrence of water hammer is prevented.

The RY series centrifugal hot oil pump is a high head, fast flow, and high-temperature medium circulation pump that transports heat transfer oil that does not contain particles or fibers. The pump body has a beautiful appearance, excellent performance, and stable sealing performance.

Overview of ZQDF solenoid valve: The ZQDF solenoid valve is an actuator used in an industrial process automation control system. It can automatically open or close the valve after receiving an electronic control signal to realize the on-off or flow adjustment control of the fluid medium in the pipeline, thereby controlling the temperature and flow rate in the system. , Pressure and other parameters are automatically adjusted or remotely controlled.

Fluorine lined pneumatic diaphragm regulating valve (ZMATF-10K) Pneumatic diphragm control valve (ZMATF-10K) The ZMATF (pneumatic open) pneumatic diaphragm regulating valve and ZMBTF (pneumatic close) pneumatic diaphragm regulating valve are composed of a multi spring pneumatic diaphragm actuator and a diaphragm valve. The diaphragm valve body has smooth flow, the throttling element is an elastic diaphragm, and there is no stuffing box on the valve cover. Therefore, the flow capacity of the valve is larger than that of general regulating valves and there is no leakage, which can be used as a shut-off valve within the allowable pressure difference range. The air opening and air closing functions are achieved by the forward and reverse actuators. This valve is suitable for regulating high viscosity fluids, suspended particles, fibrous media, toxic media, and corrosive media.