A252 steel piling pipe

In addition to using steel pipes as raw materials to produce eccentric reducing pipes, some specifications of reducing pipes can also be produced using stamping forming technology using steel plates. The shape of the stamping die used for stretching refers to the design of the inner surface size of the reducing pipe, and the steel plate after cutting is stamped and stretched into shape using the stamping die

The "8" character is a type of pipeline component, mainly for the convenience of maintenance. You can paint the upper half of the "8" character black to determine the specific shape. It's half a blind plate and half an iron ring. Commonly used for pipeline flanges that require process changes, the materials mainly include carbon steel, stainless steel, and alloy, which can be selected based on the pipeline pressure level and pipeline medium.

Out Diameter: 4"-20" Wall Thickness: 3-20mm Length : 3-12m, or according to customer’s requirement End: Plain End, Beveled End, Treaded End Standard: ASTM 5L, ASTM A53, ASTM A178, ASTM A500/501, ASTM A691, ASTM A252, ASTM A672, EN 10217

Pipe cap, also known as head, plug, cap, pipe cap, or blind, is a pipe fitting welded to the pipe end or installed on the external thread of the pipe end to cover the pipe. Used to close pipelines, with the same effect as pipe plugs. The form of blind plates is similar, except that blind plates can be dismantled for sealing, while welded pipe caps cannot be dismantled. The design of the pipe cap includes a convex pipe cap, a conical shell, a reducing section, a flat cover, and a tightening mouth. Convex pipe caps include: hemispherical pipe caps, elliptical pipe caps, dished pipe caps, and spherical crown pipe caps. From the perspective of force, the convex pipe cap gradually becomes less effective than the hemispherical pipe cap, but from the perspective of manufacturing difficulty, it gradually becomes easier to manufacture.

Stainless steel elbows need to be protected according to certain process measures during use and production, to protect the rationality and quality of castings. Production and processing should be carried out according to certain process techniques to protect the quality of stainless steel elbows. The stainless steel elbow is protected by a long nozzle and enters below the liquid level of the ladle. The ladle is sealed with a cover, and the sealing between the long nozzle and the ladle cover is also necessary to protect the sealing performance of the casting. Before injecting water into the stainless steel elbow ladle, the ladle is filled with argon (nitrogen) for about 6 minutes to ensure that the oxygen content inside the ladle is less than 2%. A certain amount of oxygen input is strictly controlled to ensure good performance during use. Through such protection, the oxygen content in stainless steel elbows will remain unchanged or decrease to some extent.

Product Introduction: 1、 Product details of micro resistance slow closing butterfly check valve: Product name: Micro resistance slow closing butterfly check valve Product features: Suitable for medium pipelines such as clean water, sewage, and seawater with a nominal pressure of 1 MPa and a medium temperature of ≤ 80%, as well as pressurized water supply and drainage

Electric flange ball valve has the same 90 degree lifting action, with a circular through-hole or channel passing through its axis. The ratio between the sphere and the channel should be such that when the sphere rotates 90 degrees, it should all appear spherical at the inlet and outlet, thereby cutting off the flow.

Summary: KC8104Q pneumatic diaphragm sleeve control valve is a common improved product.In addition to the common sleeve valve has good stabillity,versatillity,easy maintenance and other advantages.It also hai the advantages of small volume,light weight and large flow coefficient.

Screw filter is an indispensable device for conveying medium pipelines, usually installed in the pressure relief valve, pressure relief valve, water level valve or other equipment at the end of the inlet, used to eliminate impurities in the medium, in order to protect the normal use of the valve and equipment.