Spectacle blind

ASTM A252 Standard is Specification for Welded and Seamless Steel Pipe Piles EN10219 / EN10210 S275J0H S355J0H ASTM/ASME A252/SA252 steel piling pipe is a structural pipe ideally suited for application in buildings, retaining walls, and other structures needing solid, dependably, quality made steel piling pipe as its structure.

In addition to using steel pipes as raw materials to produce eccentric reducing pipes, some specifications of reducing pipes can also be produced using stamping forming technology using steel plates. The shape of the stamping die used for stretching refers to the design of the inner surface size of the reducing pipe, and the steel plate after cutting is stamped and stretched into shape using the stamping die

Out Diameter: 4"-20" Wall Thickness: 3-20mm Length : 3-12m, or according to customer’s requirement End: Plain End, Beveled End, Treaded End Standard: ASTM 5L, ASTM A53, ASTM A178, ASTM A500/501, ASTM A691, ASTM A252, ASTM A672, EN 10217

Pipe cap, also known as head, plug, cap, pipe cap, or blind, is a pipe fitting welded to the pipe end or installed on the external thread of the pipe end to cover the pipe. Used to close pipelines, with the same effect as pipe plugs. The form of blind plates is similar, except that blind plates can be dismantled for sealing, while welded pipe caps cannot be dismantled. The design of the pipe cap includes a convex pipe cap, a conical shell, a reducing section, a flat cover, and a tightening mouth. Convex pipe caps include: hemispherical pipe caps, elliptical pipe caps, dished pipe caps, and spherical crown pipe caps. From the perspective of force, the convex pipe cap gradually becomes less effective than the hemispherical pipe cap, but from the perspective of manufacturing difficulty, it gradually becomes easier to manufacture.

Stainless steel elbows need to be protected according to certain process measures during use and production, to protect the rationality and quality of castings. Production and processing should be carried out according to certain process techniques to protect the quality of stainless steel elbows. The stainless steel elbow is protected by a long nozzle and enters below the liquid level of the ladle. The ladle is sealed with a cover, and the sealing between the long nozzle and the ladle cover is also necessary to protect the sealing performance of the casting. Before injecting water into the stainless steel elbow ladle, the ladle is filled with argon (nitrogen) for about 6 minutes to ensure that the oxygen content inside the ladle is less than 2%. A certain amount of oxygen input is strictly controlled to ensure good performance during use. Through such protection, the oxygen content in stainless steel elbows will remain unchanged or decrease to some extent.

Summary: KC8104Q pneumatic diaphragm sleeve control valve is a common improved product. In addition to the common sleeve valve has good stability, versatility, easy maintenance and other advantages; It also has the advantages of small volume, light weight and large flow coefficient.

Fluorine linde adjusting valves widely used in acid, alkali and other strong corrosive media and toxic, volatile, permeable and other gas, liquid media control.

The Q947F electric fixed ball valve has low torque, small seat deformation, stable sealing performance, and long service life, making it suitable for high-pressure and large-diameter applications. Nominal diameter: DN15-DN1000 Nominal pressure: 1.0MPa-100MPa Medium temperature: -20 ℃ -250 ℃ Function options: switch, adjustment, high-temperature type, etc

Internal screw swing check valves refer to opening and closing parts by the flow of media and force to open or close, in order to prevent the media backflow of the valve.