30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Y43X fixed proportional pressure reducing valve
Overview of fixed proportional pressure reducing valve: The proportional pressure reducing valve has beautiful appearance, reliable quality, accurate ratio, stable operation, and reduces both dynamic pressure and static pressure. The valve uses the pressure difference generated by the different cross-sectional areas of the piston inside the valve b1
-
DYH41X quick closing check valve
DYH41X quick closing check valve overview: The quick-closing check valve is mainly composed of body, valve seat, valve stem, spring, valve clack, guide sleeve and other parts. When the pump is turned on, the valve flap rises under the thrust of the water bottom to open the valve, and the spring is quickly closed under the action of the spring force1
-
100D fixed water level valve
Product overview of 100D fixed water level valve: 100D fixed water level valve is a diaphragm valve that adjusts the height of the liquid level of the water tank and water tower. The fixed water level valve is controlled by a floating ball. When the liquid level reaches the set height, the valve transmits a signal to the water pump through the rele1
-
ZGB corrugated flame arrester
Overview of ZGB-1 corrugated flame arrestor: The ZGB-1 new corrugated oil storage tank flame arrestor is a new product designed by the Beijing Design Institute of China Petrochemical Corporation. It has been tested and qualified by the Tianjin Fire Science Research Institute of the Ministry of Public Security according to the GB5908-86 standard of 1
-
G6k41J pneumatic rubber-lined diaphragm valve (normally open)
Brief introduction of diaphragm valve: G6K41J normally open pneumatic rubber-lined diaphragm valve is a special form of shut-off valve. Its opening and closing part is a diaphragm made of soft material, which separates the inner cavity of the valve body from the inner cavity of the bonnet, so that the valve body, The valve clack and valve stem are 1
-
BQ41F/PPL Stainless Steel Insulation Ball Valve
Brief introduction of insulation valve structure: Insulation valves are welded with a metal jacket on the valve body. Steam, heat-conducting oil, cooling water, air-conditioning, etc. are injected into the metal jacket so that the medium of the valve body can meet the requirements under the conditions of normal temperature, heating, and cooling. Th1
-
SD943H electric telescopic butterfly valve
Brief introduction of D943H electric telescopic butterfly valve: The electric telescopic butterfly valve is suitable for water supply and drainage, gas pipelines such as food, medicine, chemical industry, petroleum, electric power, textile, papermaking, etc. whose temperature is ≤80℃ and nominal pressure is ≤1.6MPa. The function of expansion and co1
-
800X differential pressure bypass balance valve
Product introduction of 800X differential pressure bypass balance valve: 800X differential pressure bypass balance valve is a valve used to balance the pressure difference between the supply/return water of the air conditioning system. The differential pressure bypass balance valve can improve the utilization rate of the system, maintain the accura1
-
CS45H inverted bucket steam trap
Introduction to CS45H inverted bucket steam trap: The inverted bucket trap is based on the principle of phase change, relying on the different thermodynamic principles of the flow rate and volume change of steam and condensate when passing through, so that different pressure differences are generated up and down the valve plate to drive the valve p1