J744X Hydraulic Angle Mud Valve

Overview of pneumatic angle seat valve: Pneumatic angle seat valve is a new generation of pneumatic angle seat valve developed by introducing advanced foreign production technology and combining modern industrial applications. Pneumatic angle seat valves are widely used in food and chemical processes, sterilization machines, high-pressure disinfection and dry cleaning machines, clothes dryers, beer production, etc.

Corrugated steel hose is a kind of high-quality flexible pipe in modern industry pipeline. As a result of austentic stainless steel manufacture,the hose has good flexibility, fatigue resistance, hot and low temperature resistance, corrosion resistance, and many other features.

The H-type stainless steel chemical centrifugal pump is a single stage single suction cantilever centrifugal pump, marked with the rated performance point and size according to the international standard 1S02858-1975 (E). It is an energy-saving product used to replace the F-type corrosion-resistant pump. This series of chemical centrifugal pumps is designed based on the performance, technical requirements, and test methods of energy-saving pumps, and is an energy-saving pump promoted in China One of the products. It is a combination of company technology personnel and domestic water pump experts who have selected excellent domestic hydraulic models for design and development. Supply and deliver clean water and liquids with physical and chemical properties similar to water that do not contain solid particles. Widely used for industrial, agricultural, urban drainage, fire water supply, etc. For transporting corrosive media between 20 ℃ and 105 ℃ or media with physical and chemical properties similar to water.

ANSI 150LB Globe valve also known as the door valve, belongs to the forced sealing valve, so when the valve is closed, must apply pressure to the disc, in order to force the sealing surface leakage.When the medium under the disc into the valve, the operating force to overcome the resistance, is the friction of the valve stem and packing and by the pressure of the medium produced by the thrust, the force to close the valve is greater than the force to open the valve, so the diameter of the valve stem to be large, otherwise the valve stem bending fault will occur.

Overview of Pneumatic Wafer Type Hard Seal Butterfly Valve: D673H pneumatic hard-sealed butterfly valve features This valve adopts a three-eccentric sealing structure, the valve seat and butterfly plate are almost wear-free, and it has a tighter and tighter sealing function. The sealing ring is made of stainless steel, which has the dual advantages of metal hard seal and elastic seal. It has excellent sealing performance, corrosion resistance and long service life regardless of low temperature and high temperature.

Internal screw swing check valves refer to opening and closing parts by the flow of media and force to open or close, in order to prevent the media backflow of the valve.

Q961F Electric Welding Ball Valve Product Overview Dimensions: Standard diameter DN50 (2 ")~DN 1400 (56") Pressure rating: ANSI Class 150~2500, PN 16~420 Working temperature: -29 ℃ (-20 ℉)~+200 ℃ (392 ℉) Applicable media: petroleum/gasoline, liquefied natural gas/liquefied petroleum gas, petrochemical industry, steel plants, heating pipelines, etc Operation mode: handle, gear (vertical/horizontal), electric

The XUVAL88-151 series pump is a radial suction high-temperature medium transfer circulation vortex pump, which transports liquid without particles or fibers. The main characteristics of the pump are small volume, exquisite appearance, high head, fast flow rate, and stable performance.

Product introduction: PCZPZ673F-6, 10, 16 knife gate valve (coal slurry valve) is suitable for the treatment of coal powder, coal, syrup, sewage, and garbage. It is an ideal sealing valve in the paper industry. It can be used for adjustment and throttling on the pipeline Install in any location.