30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
BQ41F/PPL Stainless Steel Insulation Ball Valve
Brief introduction of insulation valve structure: Insulation valves are welded with a metal jacket on the valve body. Steam, heat-conducting oil, cooling water, air-conditioning, etc. are injected into the metal jacket so that the medium of the valve body can meet the requirements under the conditions of normal temperature, heating, and cooling. Th1
-
Nitrogen sealing device
Overview of nitrogen sealing device: The nitrogen sealing device is mainly used for the constant control of the nitrogen pressure at the top of the storage tank to protect the materials in the tank from being nitridated and the safety of the storage tank. The nitrogen sealing device is composed of two parts: ZZDQ quick relief valve and ZZV micro-pr1
-
ZBSF stainless steel flange solenoid valve
Overview of ZBSF stainless steel flange solenoid valve: The ZBSF stainless steel flange solenoid valve is an actuator used in an industrial process automation control system. It can automatically open or close after receiving an electric control signal to realize the on-off or flow adjustment control of the fluid in the pipeline. This series of sol1
-
900X emergency shut off valve
Brief introduction of 900X emergency shut off valve: 900X emergency shut-off valve is a kind of valve which is used in the water supply system of fire fighting water and domestic water in parallel, and is used in the direction of water supply by users. In case of fire, a large amount of water is urgently needed for fire fighting. Domestic water sho1
-
CS49H disc flange steam trap
Brief introduction of CS49H/CS49W disc flange steam trap: Disc type steam trap is based on the principle of Bernoulli's thermal power, which uses the different characteristics of steam and condensate to cause the change of kinetic energy and potential static pressure. Make the pressure difference between the upper and lower parts of the actuator va1
-
CS17H Bimetallic Disc Trap Valve
Brief introduction of CS17H bimetallic trap: The CS17H bimetallic steam trap is driven by a bimetallic temperature sensing element to drive the valve core to open and close the valve. When the device is just started, low-temperature condensed water appears in the pipeline, the bimetal is flat, and the valve core is in the open position under the el1
-
D363H/W Butt Welding Hard Seal Butterfly Valve
Overview of D363H/W Butt Welding Hard Seal Butterfly Valve: D363H butt-welding hard-sealed butterfly valve is widely used in metallurgy, electric power, petrochemical, water supply and drainage, municipal construction and other industrial pipelines with medium temperature ≤ 425℃. It adopts precision J-shaped elastic sealing ring and three-eccentric1
-
Power station safety valve SFA48Y
Product introduction: SFA48Y high temperature and high pressure safety valve, power station safety valve: high temperature and high pressure spring safety valve is suitable for working temperature "C cast steel type" ≤425℃; "I chromium molybdenum steel type" ≤500℃; "V chromium molybdenum steel type" ≤550℃ Used as an overpressure protection device o1
-
PZ43H Plum Blossom Knife Gate Valve
Brief introduction of PZ43H plum blossom knife gate valve: The opening and closing part of the knife gate valve is the gate, and the movement direction of the gate is perpendicular to the direction of the fluid. The knife gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. The gate has two sealing surfaces. Th1