Brief introduction of CS17H bimetallic trap: The CS17H bimetallic steam trap is driven by a bimetallic temperature sensing element to drive the valve core to open and close the valve. When the device is just started, low-temperature condensed water appears in the pipeline, the bimetal is flat, and the valve core is in the open position under the elastic force of the spring. When the temperature of the condensed water gradually rises, the bimetallic temperature sensing element begins to bend and deform and push the valve core to the closed position. Before the condensate reaches its saturation temperature, the trap is completely closed. There is always high-temperature condensed water in front of the valve, no steam leakage, and good energy-saving effect.
Item NO.:
XUVAL77-71Lead Time:
45DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTColor:
SilveryMOQ:
10CS17H Bimetallic Disc Trap Valve
The bimetallic trap is the strongest trap in the thermostatic trap. Its advantages are: not afraid of water hammer, high pressure resistance, small size, light weight, not afraid of freezing, can automatically exhaust air, can be installed at any position; back pressure rate is greater than 80%. The trap is suitable for the drainage of the main steam pipe, pipe network heat tracing, instrument heat tracing, domestic heating and heating equipment that allows the storage of high-temperature condensate water, and has a wide range of applications.
Characteristics of CS17H type bimetallic disc trap:
1. The discharge temperature of the condensed water can be adjusted to effectively use the sensible heat of the condensed water.
2. There is always condensed water in front of the valve to form a water seal and no steam leakage.
3. It can be installed at any angle, and the drainage temperature can be adjusted at any time.
4. Water hammer resistance and excellent exhaust performance.
5. Spherical closing mode, long service life.
The working principle of CS17H type bimetallic disc trap:
The bimetallic trap is driven by a bimetallic temperature sensing element to drive the valve core to open and close the valve. When the device is just started, low-temperature condensed water appears in the pipeline, the bimetal is flat, and the valve core is in the open position under the elastic force of the spring. When the temperature of the condensed water gradually rises, the bimetallic temperature sensing element begins to bend and deform and push the valve core to the closed position. Before the condensate reaches its saturation temperature, the trap is completely closed. There is always high-temperature condensed water in front of the valve, no steam leakage, and good energy-saving effect.
Model specification and size table of bimetallic disc trap:
LTB6
(CS17H-16C)
WCB
A105
LTB6F
CS47H-16C
WCB
A105
(LTB6W)
CS67H-16C
WCB
A105
(TB11)
CS17H-16C
(TB11)
CS17H-16C
(TB11F)
CS47H-16C
WCB
A105
LTB3
CS17H-16C
WCB
A105
LTB3F
CS17H-16C
WCB
A105
LTB3W
CS17H-16C
WCB
A105
LTB5
CS67H-16C
WCB
A105
LTB5F
CS17H-16
15-20
25
WCB
A105
150
160
(LTB5W)
CS67H-16C
WCB
A105
Product number
Diameter (mm)
Connection method
Body material
Dimensions
L
H1
H2
W
15-25
Thread
0.01-1.6
220
95
111
23
60
15
Flange
0.01-1.6
220
150
111
23
60
20
160
111
23
60
25
160
111
26
60
32
210
118
27
61
40
230
123
30
66
50
230
123
30
66
15
Socket welding
0.01-1.6
220
95
106
35
58
20
95
106
35
58
25
95
106
35
58
15
Thread
0.01-1.6
220
95
106
35
58
20
95
106
35
58
25
95
106
35
58
15
Flange
0.01-1.6
220
150
111
23
60
20
160
111
23
60
25
160
111
26
60
32
210
118
27
61
40
230
123
30
66
50
230
123
30
66
15
Thread
0.1-1.6
350
85
80
23
54
20
85
80
23
54
25
85
80
23
54
15
Flange
0.1-1.6
350
150
80
23
54
20
150
80
23
54
25
160
80
23
54
15
Socket welding
0.1-1.6
350
85
80
23
54
20
85
80
23
54
25
85
80
23
54
15-25
Thread
0.01-1.6
350
85
90
20
62
Flange
0.01-1.6
350
80
23
54
15-25
Socket welding
0.01-1.6
350
85
80
23
54
Product Structure:
Packing & Delivery :
Packing Details:all by seaworthy plywood case and packed strongly by packing belt as below
Delivery Details:Generally it is 5-10 days if the goods are in stock. or15-30 days if the goods are OEM or not
enough subject to the order quantity. But anyway, normally, we are able to make sure the delivery will not exceed 45days.
Previous :
Power station safety valve SFA48Ynext :
CS49H disc flange steam trapIf you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported