Overview of ZBSF stainless steel flange solenoid valve: The ZBSF stainless steel flange solenoid valve is an actuator used in an industrial process automation control system. It can automatically open or close after receiving an electric control signal to realize the on-off or flow adjustment control of the fluid in the pipeline. This series of solenoid valves can be widely used It is used in textile, printing, chemical, plastic, rubber, pharmaceutical, food, machinery, electrical appliances, surface treatment and other production and research departments, as well as in people's daily life facilities such as bathrooms, canteens, and air conditioners.
Item NO.:
XUAVL77-67Lead Time:
45DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTColor:
SliveryMOQ:
10ZBSF stainless steel flange solenoid valve
ZBSF stainless steel flange solenoid valve use:
Stainless steel flange solenoid valve is an actuator used in industrial process automation control system. It can automatically open or close after receiving the electric control signal to realize the on-off or flow adjustment control of the fluid medium in the pipeline. ZBSF stainless steel solenoid valve is mainly used for the control of corrosive liquids, ultra-clean liquids and edible liquid media.
Structural characteristics of ZBSF stainless steel flange solenoid valve:
1. The main valve can be opened even at zero pressure, and the low-pressure differential flow is large, and the scope of application is wide.
2. Made of special stainless steel, suitable for edible fluids, ultra-clean fluids and corrosive media.
3. Different mediums are used and targeted sealing is adopted to further improve the rationality of the solenoid valve.
4. Liquid, gas, and oil products can be used in combination, which further increases the use range of solenoid valves.
5. In special occasions, it can be energized for a long time, and high temperature resistant materials are used. The temperature of the medium fluid can reach 220 ℃.
Structural principle of ZBSF stainless steel flange solenoid valve:
This valve is a step-by-step direct pilot solenoid valve. According to the switch state when the power is off, it can be divided into a normally closed solenoid valve and a normally open solenoid valve.
Normally closed solenoid valve: After the coil is energized, the armature first drives the auxiliary valve to open under the action of electromagnetic force, and the main valve opens under the action of the formed medium pressure difference and electromagnetic force. The coil is de-energized, the armature parts are reset, and the main and auxiliary valves are closed tightly by the pressure of the medium.
Normally open solenoid valve: After the coil is energized, the armature moves down under the action of magnetic force, pushing the valve plug of the auxiliary valve to move down, until the auxiliary valve is pressed against the auxiliary valve seat and the auxiliary valve is closed. As the pressure difference between the upper and lower pressure of the main valve cup tends to be equal, the main valve The valve cup is pressed tightly by the magnetic force and its own weight, and the valve is closed. The coil is de-energized, the magnetic force is zero, the armature and the auxiliary valve plug are lifted by the action of the spring, the auxiliary valve opens, the medium in the main valve cup flows away through the auxiliary valve, the pressure drops, and the main valve cup rises upward by the pressure difference between the upper and lower sides. , The main valve opens, and the valve opens.
Technical parameters of ZBSF stainless steel flange solenoid valve:
ZBSF-1(1Y):≤60℃
ZBSF-2(2Y):≤200℃
Working medium
Medium temperature ℃
Nominal pressure (MPa)
1.6
Working pressure difference (MPa)
0-1.6
Voltage
Other specifications of AC220V DC24V can be made for special order
Service life
According to JB/T7352-94
Leakage amount (ml/min)
According to JB/T7352-94·F
Nominal diameter (mm)
15
20
25
32
40
50
Rated flow coefficient (KV)
3.8
7.4
10.3
18.8
25.7
41
Power consumption (VA)
40
50
ZBSF stainless steel flange solenoid valve size:
Nominal diameter DN
L
H
D
D1
D2
b
f
n-∅d
15
115
148
95
65
46
14
2
4-14
20
115
148
105
75
56
16
2
4-14
25
125
148
115
85
65
16
3
4-14
32
150
182
140
100
76
18
3
4-18
40
160
182
150
110
84
18
3
4-18
50
190
192
160
125
99
20
3
4-18
Product Structure:
Packing & Delivery :
Packing Details:all by seaworthy plywood case and packed strongly by packing belt as below
Delivery Details:Generally it is 5-10 days if the goods are in stock. or15-30 days if the goods are OEM or not
enough subject to the order quantity. But anyway, normally, we are able to make sure the delivery will not exceed 45days.
Previous :
900X emergency shut off valvenext :
CS19H Disc Type Steam TrapsIf you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported