30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
HBGP4X Angle Waterproof Hammer Air Valve
Features: The angle type waterproof hammer air valve is composed of an angle type air valve and an exhaust throttling device. The micro exhaust valve is integrated into the angle type air valve. It integrates functions such as high-speed exhaust without blowing and blocking to prevent valve closing water hammer, throttling exhaust to ensure safe wa1
-
J744X Hydraulic Angle Mud Valve
Overview of piston type quick opening mud discharge valve: The J744X hydraulic piston type quick open sludge valve and pneumatic piston type quick open sludge valve are generally installed outside the bottom wall of various water treatment plants or industrial sedimentation tanks to remove sediment and dirt from the sedimentation tank.
-
EG6K41J British standard diaphragm valve
Design and Manufacturing: GB122239 Structural length: GB12221, JB1688 Flange connection size: GB4216, JB78 G6B41W unlined diaphragm valve G6B41J rubber lined pneumatic diaphragm valve, normally open diaphragm valve
-
Stainless steel solenoid valve
An electromagnetic valve is a fluid control element that is controlled by the moving piston of an electromagnetic coil to attract electromagnetic force. It is an actuator for automated equipment pipelines. Below are illustrated working principles of a direct piston type electromagnetic valve and a pilot piston type electromagnetic valve, with manua1
-
Direct acting timed drainage solenoid valve
Features: 1. Direct pull diaphragm type. 2. Zero pressure start, suitable for low-pressure systems. Media: air, gas, water, etc Fluid temperature: nitrile rubber: -5 ℃~80 ℃ EPDM adhesive: -5 ℃~100 ℃ Fluorine rubber: -5 ℃~120 ℃ Pressure: 0.~1.0MPa Connection dimensions: 3/8 ", 1/2", 3/4 ", 1", 11/4 ", 11/2", 2 ", Thread: G thread, NPT thread Diamete1
-
High wear-resistant ball valve
Product features and uses: Adopting a three-stage ball valve with a full bore design, it has a large flow capacity, low flow resistance, reduces wear, and extends the service life of the valve. The valve seat sealing pair adopts a hidden design to avoid direct damage caused by medium erosion. The valve is equipped with a high wear-resistant sheath 1
-
HQ41X Ball Check Valve
The HQ41X ball type ball check valve adopts a rubber wrapped ball as the valve disc. Under the action of the medium, it can roll up, down, left and right on the integral slide inside the valve body to open or close the valve. Silent closure, no water hammer generated, good sealing performance. The valve body adopts a full water flow channel, with h1
-
Q347F Worm Gear Fixed Ball Valve
Product Introduction: 1、 Product Description: Product Model: Q347F/H/Y Product Name: Q347 Fixed Worm Gear Ball Valve Split and Three Section Fixed Ball Valves, also known as Side Mount Split Ball Valves, divide the valve body into asymmetrical sections along the axis perpendicular to the valve channel
-
Pneumatic knife type gate valve
Pneumatic knife gate valve, also known as pneumatic knife gate valve, pneumatic knife gate gate valve, pneumatic slurry valve, and pneumatic mud valve, has a gate as its opening and closing component. The direction of movement of the gate is perpendicular to the direction of the fluid, and the medium is cut off by a blade shaped gate that can cut f1