High pressure boiler pipes are used for heating surface pipes of low and medium pressure boilers (with a working pressure generally not exceeding 5.88Mpa and a working temperature below 450 ℃); Used for heating surface pipes, economizers, superheaters, reheaters, petrochemical industry pipes, etc. of high-pressure boilers (with working pressure gen1
A concentric reducer is a type of pipe that is directly welded to a steel pipe. The main manufacturing standards for concentric reducers are generally GB/T12459, GB/T13401, ASME B16.9, SH3408, SH3409, HG/T21635, HG/T21631, and SY/T0510. Corresponding to the concentric reducer, there are also eccentric reducers made of carbon steel, alloy steel, and1
Hydraulic support pipes are made of high-quality carbon structural steel with appropriate addition of one or several alloy elements to improve the strength, toughness, and hardenability of the steel. After being made, this type of steel usually needs to undergo heat treatment such as quenching and tempering, chemical heat treatment, and surface que1
Equal diameter cross, commonly referred to as a professional term, refers to pipe fittings and pipeline connectors, used in main pipelines where branch pipes are required. Equal diameter cross is a type of cross, which can be divided into two types: general equal diameter cross and differential diameter cross. Named because the four ends can be con1
The J61Y and J61H forged steel globe valve series products are not only suitable for medium and low pressure, but also for high pressure. They play a role in cutting off or connecting regulating pipelines in various operating conditions such as petroleum, chemical, pharmaceutical, fertilizer, and power industries.
ASTM A252 Standard is Specification for Welded and Seamless Steel Pipe Piles EN10219 / EN10210 S275J0H S355J0H ASTM/ASME A252/SA252 steel piling pipe is a structural pipe ideally suited for application in buildings, retaining walls, and other structures needing solid, dependably, quality made steel piling pipe as its structure.
In addition to using steel pipes as raw materials to produce eccentric reducing pipes, some specifications of reducing pipes can also be produced using stamping forming technology using steel plates. The shape of the stamping die used for stretching refers to the design of the inner surface size of the reducing pipe, and the steel plate after cutti1
Pipe cap, also known as head, plug, cap, pipe cap, or blind, is a pipe fitting welded to the pipe end or installed on the external thread of the pipe end to cover the pipe. Used to close pipelines, with the same effect as pipe plugs. The form of blind plates is similar, except that blind plates can be dismantled for sealing, while welded pipe caps 1