30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Gate valve flange end JIS10K 20K
Gate Valve opens shuts is the damper plate, the damper plate heading and the fluid direction is vertical, the gate valve only can do all starts with the entire pass, cannot make the adjustment and the throttle. The damper plate has two packing surfaces, but the most commonly used pattern gate valve two packing surfaces form, the wedge-shaped angle 1
-
Brass internal threaded foot valve
Brass foot valve by the valve body, cover, disc, sealing ring and gasket and other components, the foot valve disc has a single, double and multi - disc and other types.After the bottom valve is connected to the pipeline, the liquid medium enters the body from the direction of the valve cover. The pressure of the liquid acts on the disc, making the1
-
Brass 200P pressure reducing valve
Model 200P pressure reducing valve is a direct acting type adjustable pressure reducing valve, using diaphragm type hydraulic operation, can be installed horizontally or vertically in water supply, fire fighting system or other clean water system.
-
Low and medium pressure boiler tubes
High pressure boiler pipes are used for heating surface pipes of low and medium pressure boilers (with a working pressure generally not exceeding 5.88Mpa and a working temperature below 450 ℃); Used for heating surface pipes, economizers, superheaters, reheaters, petrochemical industry pipes, etc. of high-pressure boilers (with working pressure gen1
-
Wear resistant hydraulic support pipe
Hydraulic support pipes are made of high-quality carbon structural steel with appropriate addition of one or several alloy elements to improve the strength, toughness, and hardenability of the steel. After being made, this type of steel usually needs to undergo heat treatment such as quenching and tempering, chemical heat treatment, and surface que1
-
A53 ERW STEEL PIPE
Out Diameter: 4"-20" Wall Thickness: 3-20mm Length : 3-12m, or according to customer’s requirement End: Plain End, Beveled End, Treaded End Standard: ASTM 5L, ASTM A53, ASTM A178, ASTM A500/501, ASTM A691, ASTM A252, ASTM A672, EN 10217
-
Brass flange ball valve
The brass ball valve evolved from the plug, and its opening and closing parts act as a ball, using the ball to rotate 90 degrees around the axis of the valve stem to achieve the purpose of opening and closing. It has the characteristics of fast opening and closing, lightweight, simple structure, small volume, good sealing performance, and low fluid1
-
Flange electric ball valve
Electric stainless steel flange ball valve is a rotary type ball valve with an angle of 0~90 °. It has excellent sealing performance, large flow capacity, small flow resistance coefficient, simple structure, convenient maintenance, long service life, equal valve channel and connecting pipe diameter, and the medium can flow almost without loss. Elec1
-
Pneumatic three-way threaded ball valve
Design standard: MSS SP-110 Valve body wall thickness: ASMEB16.34 Inspection and Testing: MSS SP-110 Pipe threaded end: ASMEB1.20.1/DIN 2999/259/ISO 7/1, ISO 288/1/JIS B0203 Valve body materials: WCB, CF8, C8M, CF3M, 2205