D81F and D81X stainless steel sanitary butterfly valves are equipped with standard electronic polishing, ensuring a smooth surface that is clean and free of media accumulation areas, without potential pollution. Quick disassembly and assembly of valves, making valve opening and maintenance quick and easy, reducing process downtime. Sanitary, automatic or manual operated butterfly valves are widely used in various fields such as beer, beverages, dairy products, fruit juice, pharmaceuticals, biotechnology, etc.
Item NO.:
XUVAL88-332Lead Time:
50 DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTMOQ:
16. Soft eccentric butterfly valves are suitable for bi-directional opening and closing and adjustment of ventilation and dust removal pipelines, and are widely used in gas pipelines and waterways in metallurgical, light industry, power, petrochemical systems, etc.
Operational principle
D81F and D81X stainless steel sanitary butterfly valves are a type of valve that opens and closes based on the rotation of the valve stem while driving the disc plate to rotate. In the cylindrical channel of the butterfly valve body, the disc shaped butterfly plate rotates around the axis, mainly rotating the disc plate 90 ° for flow control. When the disc plate reaches 90 °, the valve door is in a fully open state, and the angle of the disc plate can be changed to adjust the medium flow rate. It is generally installed in the diameter direction of the pipeline. Butterfly valves and valve stems themselves do not have locking capabilities. In order to effectively regulate flow, a worm gear reducer needs to be installed. Butterfly valves equipped with worm gear reducers not only have self-locking capabilities, but also can change the operational performance of the butterfly valve and more accurately regulate medium flow.
Matters needing attention
1. During the operation of butterfly valves, it is necessary to periodically perform full open and full close operations to maintain the flexibility and lubrication of all valve components and avoid rusting.
2. When closing the butterfly valve, if it does not close tightly, you can first fully open the butterfly valve again, use the pressure of the fluid in the pipeline to flush and remove impurities from the inner wall of the valve body, and then close the valve again.
3. Try to filter out impurities in the pipeline as much as possible to prevent the sealing surface from being crushed when the butterfly valve is closed, causing the valve to be unable to fully close, resulting in leakage and potential safety hazards.
4. The opening status of the butterfly valve disc should be greater than 15 degrees;, That's because if the butterfly valve is in a state with a large throttling range, the back of the butterfly plate is prone to cavitation, and there is a risk of damage to the valve.
5. When the butterfly valve is in the middle opening position, the operating mechanism needs to be self-locking.
6. To prevent mechanical damage to the butterfly valve, do not allow sediment, chemicals, humid gases, and other substances in the air to corrode the valve and affect its quality.
7. The threads, bearings, gears, and other working interface components of butterfly valves should be lubricated regularly.
If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported