30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Elbow for water treatment
The elbow is a kind of pipe fitting used at the turn of the pipeline. Among all the pipe fittings used in the piping system, the proportion is relatively large, about 80%. Generally, different forming processes are selected for elbows of different materials or wall thickness. The commonly used seamless elbow forming processes in manufacturing plant1
-
180 ° welded elbow
In pipeline systems, elbows are fittings that change the direction of the pipeline. According to angles, there are three most commonly used types: 45 ° and 90 ° and 180 °. In addition, according to engineering needs, there are also other abnormal angle elbows such as 60 °. The materials of elbows include cast iron, stainless steel, alloy steel, mal1
-
Thick walled seamless petroleum casing
Tubing is mainly used to connect drill collars and drill bits and transmit drilling power; A casing is a steel pipe used to support the walls of oil and gas wells, ensuring the normal operation of the entire well during the drilling process and after completion.
-
Low and medium pressure boiler tubes
High pressure boiler pipes are used for heating surface pipes of low and medium pressure boilers (with a working pressure generally not exceeding 5.88Mpa and a working temperature below 450 ℃); Used for heating surface pipes, economizers, superheaters, reheaters, petrochemical industry pipes, etc. of high-pressure boilers (with working pressure gen1
-
Concentric reducer
A concentric reducer is a type of pipe that is directly welded to a steel pipe. The main manufacturing standards for concentric reducers are generally GB/T12459, GB/T13401, ASME B16.9, SH3408, SH3409, HG/T21635, HG/T21631, and SY/T0510. Corresponding to the concentric reducer, there are also eccentric reducers made of carbon steel, alloy steel, and1
-
Wear resistant hydraulic support pipe
Hydraulic support pipes are made of high-quality carbon structural steel with appropriate addition of one or several alloy elements to improve the strength, toughness, and hardenability of the steel. After being made, this type of steel usually needs to undergo heat treatment such as quenching and tempering, chemical heat treatment, and surface que1
-
Equal diameter cross
Equal diameter cross, commonly referred to as a professional term, refers to pipe fittings and pipeline connectors, used in main pipelines where branch pipes are required. Equal diameter cross is a type of cross, which can be divided into two types: general equal diameter cross and differential diameter cross. Named because the four ends can be con1
-
A252 steel piling pipe
ASTM A252 Standard is Specification for Welded and Seamless Steel Pipe Piles EN10219 / EN10210 S275J0H S355J0H ASTM/ASME A252/SA252 steel piling pipe is a structural pipe ideally suited for application in buildings, retaining walls, and other structures needing solid, dependably, quality made steel piling pipe as its structure.
-
Eccentric different-diameter pipe
In addition to using steel pipes as raw materials to produce eccentric reducing pipes, some specifications of reducing pipes can also be produced using stamping forming technology using steel plates. The shape of the stamping die used for stretching refers to the design of the inner surface size of the reducing pipe, and the steel plate after cutti1