30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
D363H turbine butterfly valve
D363H/W-C I. P.R butt welded metal hard sealed butterfly valves are suitable for use as opening and closing or regulating media on pipelines with high temperature, high pressure, fire prevention, insulation, and other characteristics. Its main characteristics are as follows: Compact in structure, small in size, light in weight, flexible in operatio1
-
Clamp type high-pressure check valve
The H62Y high-pressure butt welding check valve is widely used in water, oil, natural gas pipeline systems and oilfield systems with a pressure of PNl6-45Mpa and a temperature of -20-+450 ℃. It consists of a valve body, a valve disc, a spring, and a central shaft. Except for the valve body made of high-quality carbon steel, all other materials are 1
-
High pressure butt welded ball valve
High pressure butt welded ball valves have strong adaptability to pressure and temperature changes due to the valve seat being composed of carbon fiber reinforced Teflon sealing rings and disc springs, and will not produce any leakage within the marked pressure and temperature range. The machining process of the sphere is tracked and detected by ad1
-
Low temperature stop valve
Low temperature shut-off valve refers to a valve in which the closing element (valve disc) moves along the centerline of the valve seat. According to the movement of the valve disc, the change in the valve seat opening is directly proportional to the valve disc stroke. Due to the relatively short opening or closing stroke of the valve stem and the 1
-
Electric sleeve regulating valve
The electric single seat regulating valve is composed of a series of electronic electric actuators (intelligent integrated actuators) such as 3810L/PSL and a single seat regulating valve. The electronic electric actuator is equipped with a built-in servo system, without the need for an additional servo amplifier. It can be controlled for operation 1
-
National standard straight wave corrugated pipe globe valve
Product model: WJ41H Nominal diameter: DN15-300mm Nominal pressure: PN1.6~4.0MPa Working temperature: -20 ° C-350 ° C Valve body material: WCB, F304, F316 Design standard: DIN3356 Structural length: DIN3202 Connecting flange: DIN2543-2545 Testing and Inspection: DIN3230
-
Stainless steel pneumatic diaphragm valve
Pneumatic diaphragm valve, also known as diaphragm globe valve, refers to a compression device that is equipped with a flexible diaphragm or a combination diaphragm in the valve body and valve cover, and its closed part is connected to the diaphragm. The valve seat can be a weir shaped or a straight channel wall. The flexible membrane or composite 1
-
Intelligent electric control valve
Electric control valves are important execution unit instruments in industrial automation process control. With the increasing level of automation in the industrial field, it is being increasingly applied in various industrial production fields. Compared with traditional pneumatic control valves, electric control valves have obvious advantages: ene1
-
J65Y forged steel globe valve
There are three types of valve cover designs for J65Y forged steel globe valves. The first type is a bolt type valve cover. Valves designed according to this design form are connected to the valve body and cover with bolts and nuts, and sealed with a spiral wound gasket (made of 316 clamped flexible graphite). When customers have special requiremen1