30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
-
Bronze internal thread Y type strainer
Screw filter is an indispensable device for conveying medium pipelines, usually installed in the pressure relief valve, pressure relief valve, water level valve or other equipment at the end of the inlet, used to eliminate impurities in the medium, in order to protect the normal use of the valve and equipment.
-
Cast iron PN16 Y-Strainer
The Y-type filter is an indispensable filter device in the pipeline system of conveying medium. The Y-type filter is usually installed in the inlet of the pressure reducing valve, pressure relief valve, water level valve or other equipment to remove impurities in the medium, in order to protect the normal use of the valve and equipment.
-
J11Y/J61Y forged steel globe valve
Brief introduction: Because the valve stem opening or closing stroke is relatively short, and has a very reliable cut-off function, and because the change of valve seat opening is in direct proportion to the stroke of valve disc, it is very suitable for flow regulation. Therefore, this type of valve is very suitable for cutting off or regulating an1
-
BZ41H insulated gate valve
Overview of BZ41H insulated gate valve: The insulated gate valve is mainly used in petroleum, chemical, metallurgical, pharmaceutical and other systems. The jacket of the valve is welded between the two flanges of the valve. The side and bottom of the valve are equipped with the connection port of the jacket. The jacket can freely flow through stea1
-
D363H/W Butt Welding Hard Seal Butterfly Valve
Overview of D363H/W Butt Welding Hard Seal Butterfly Valve: D363H butt-welding hard-sealed butterfly valve is widely used in metallurgy, electric power, petrochemical, water supply and drainage, municipal construction and other industrial pipelines with medium temperature ≤ 425℃. It adopts precision J-shaped elastic sealing ring and three-eccentric1
-
Water seal gate valve
Product introduction: Water seal gate valve is suitable for opening and closing devices on pipelines with nominal pressure of 100MPa, working temperature of 425°C, and working medium of water, steam, oil and non-corrosive gas. It is especially suitable for steam turbine vacuum condensing systems in thermal power plants.
-
Flat welding flange with neck
Advantages: Necked flat welding flanges are also classified as flat welding flanges, as they have a short neck, which improves the strength of the flange and improves its load-bearing capacity. So it can be used on higher pressure official roads. Disadvantages: Compared to plate type flat welding flanges, they have a higher cost and are more prone 1
-
ZZYP-16C DN80 Pressure Control Valve
The self operated pressure regulating valve series products have three structures: single seat (ZZYP), sleeve (ZZYM), double (ZZYN), and so on; There are two types of actuators: membrane type and piston type; There are two types of functions: pressure regulation after the valve for pressure reduction (Type B) and pressure regulation before the valv1