TP41Y valve sleeve type blowdown valve product overview: TP41Y valve sleeve type blowdown valve is a sleeve type blowdown valve composed of valve body, valve seat, valve core, valve sleeve and valve stem, etc., used for oil and gas or gas medium transportation pipelines to cut off the blowdown. It mainly passes through the valve core. The up and do1
YB13X internal thread proportional pressure reducing valve product overview: YB13X internal thread proportional pressure reducing valve is a regulating valve that is composed of a valve body, a valve seat, a diversion cover and a piston to reduce the pressure of the flowing medium in an equal proportion. The two ends of the valve body are equipped 1
Overview of pipeline flame arrester: Pipeline flame arrester, also known as fire arrester, is to prevent external flames from entering equipment and pipelines containing flammable and explosive gases or to prevent flames from spreading between equipment and pipelines. It is a safety device used to prevent hydrogen flames from spreading outwards. It1
The inverted bucket steam trap is a reliable, efficient, and energy-saving trap. The inverted bucket steam trap is based on the working principle of Density contrast between condensed water and steam, and its internal structure is connected to the inverted bucket by a lever system. The inverted bucket steam trap valve is usually used in systems tha1
Magnetic drive centrifugal pump (referred to as magnetic pump) is a new type of pump that applies modern magnetic mechanics principles and utilizes the magnetic transmission of permanent magnets to achieve contactless transmission of torque. When the motor drives the outer rotor (i.e. outer magnetic steel) assembly to rotate, the magnetic force lin1
Electromagnetic valve is an industrial equipment controlled by electromagnetic, which is an automation basic component used to control fluids. It belongs to the actuator and is not limited to hydraulic or pneumatic systems. It is used in industrial control system to adjust the direction, flow, speed and other parameters of medium. The solenoid valv1
The quick opening sludge discharge valve is usually installed on the outer wall of the bottom of the sedimentation tank to remove sediment and dirt from the bottom. The valve is divided into two chambers by a reinforced nylon rubber diaphragm. It is operated by a pneumatic or hydraulic source as the actuator, and is controlled by an electric or man1
A gate valve is a gate with an opening and closing element, and its movement direction is perpendicular to the direction of the fluid. The gate valve can only be fully opened and fully closed, and it varies depending on the door parameters, usually 5 °. When the medium temperature is not high, it is 2 ° 52 '. Improving its processability and compen1
Overview of piston type quick opening mud discharge valve: The J744X hydraulic piston type quick open sludge valve and pneumatic piston type quick open sludge valve are generally installed outside the bottom wall of various water treatment plants or industrial sedimentation tanks to remove sediment and dirt from the sedimentation tank.