30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Low temperature stop valve
Low temperature shut-off valve refers to a valve in which the closing element (valve disc) moves along the centerline of the valve seat. According to the movement of the valve disc, the change in the valve seat opening is directly proportional to the valve disc stroke. Due to the relatively short opening or closing stroke of the valve stem and the 1
-
Bidirectional butterfly valve
Double directional butterfly valve, double directional pressure butterfly valve, double directional pressure metal hard seal butterfly valve. The use of an inclined elliptical butterfly plate radial dynamic balance sealing system reliably achieves zero leakage in butterfly valve sealing, and has been widely used by users both domestically and inter1
-
Stainless steel pneumatic diaphragm valve
Pneumatic diaphragm valve, also known as diaphragm globe valve, refers to a compression device that is equipped with a flexible diaphragm or a combination diaphragm in the valve body and valve cover, and its closed part is connected to the diaphragm. The valve seat can be a weir shaped or a straight channel wall. The flexible membrane or composite 1
-
Forged steel manual flange gate valve
There are three types of valve cover designs for forged steel gate valves. The * type is a bolt type valve cover. Valves designed according to this design form have valve bodies and valve covers connected by bolts and nuts, and wound gaskets (made of 316 flexible graphite) sealed. When customers have special requirements, metal ring connections can1
-
Forged steel Y-shaped filter
Forged steel Y-shaped filters are an indispensable insulation device used in water, oil, gas pipelines, and various equipment. They are usually installed at the inlet of pressure reducing valves, relief valves, constant water level valves, or other equipment to remove impurities in the medium and protect the normal use of valves and equipment This 1
-
ZS direct acting solenoid valve
ZS Direct Acting Electromagnetic Valve: Two port, two position, normally closed, normally open type. The valve body is made of copper forging, and the piping method can be installed at any angle. To enhance the service life, the horizontal pipe coil is facing upwards. The product is produced in series, with a small volume and large flow rate. The d1
-
American standard insulated plug valve
A plug valve is a closing or plunger-shaped rotary valve that is opened or closed by rotating 90 degrees so that the access port on the plug is the same or separate from the access port on the valve body. The shape of the plug valve can be cylindrical or conical. In a cylindrical valve plug, the passage is generally rectangular.In a tapered valve p1
-
American standard low-temperature gate valve
1. Design and manufacturing: AP1600 2. Structural length: ANSI B16 ten 3. Connection size: ANSI B16.5 4. Valve body material: LCB, LC3, CF8 Product Introduction: Manufacturing Standards: GB, JB, HG, API, ANSI, DIN, BS. Valve body materials: WCB, WC6, WC9, 20 well, A105, F11, CF8, CF8M, low-temperature steel, etc. Working pressure: CLass 150-900lb N1
-
American standard insulated plug valve
In a tapered valve plug, the channel is trapezoid. These shapes make the structure of the plug valve light, but at the same time, it also produces a certain loss. The plug valve is best suited as a cut-off and closing medium and for shunt applications, but depending on the nature of the application and the erosion resistance of the sealing surface,1