30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
J23W Needle Valve
Brief introduction of J23W external thread needle valve: The external threaded needle valve is an important part of the instrument measurement pipeline system, mainly including stop valve and ball valve, its function is to open or cut off the pipeline passage. The instrument needle valve is an important part of the instrument measurement pipeline s1
-
D671F46 stainless steel fluorine lined butterfly valve
Product introduction: D671F46 pneumatic wafer butterfly valve with fluorine lining is composed of tetrafluoroethylene sealing butterfly valve, stainless steel valve plate and valve stem. It is suitable for working conditions where the temperature is ≤150℃, weak corrosion or cleanliness has certain requirements, and it is used as the function of reg1
-
Z960Y high temperature and high pressure gate valve
Brief introduction of high temperature and high pressure gate valve: Designed and manufactured in accordance with JB/T3395 and other standards, it can be used with domestic equipment. The middle cavity of the high temperature and high pressure welded gate valve adopts a pressure self-tightening sealing structure. The higher the internal cavity pres1
-
Emergency shut-off valve
Product introduction: Emergency shut-off valve, also known as safety shut-off valve, means that in the event of an emergency, the valve will be quickly closed or opened to avoid accidents. The emergency shut-off valve is a normally open pulse-triggered solenoid valve, which has the functions of self-locking and manual reset.
-
VQ677F Pneumatic V-type ball valve
Product introduction: V-shaped ball valve is a kind of ball valve. Its closing part is a V-shaped opening on the hemisphere. The V-shaped opening has a sharp edge. During the rotation of the sphere, the closing parts have a wiping effect, which has good effect on the medium. Strong cutting force, the V-shaped opening of the sphere and the valve sea1
-
Cantonese Flanged Ball Valve
Cantonese flanged ball valve and gate valve are the same type of valve, the difference is that its closing part is a sphere, and the sphere rotates around the center line of the valve body to open and close a valve. Ball valves are mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. Cantonese ball valve i1
-
Stainless steel gate valve
The opening and closing part of the gate valve is the gate, and the movement direction of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valve form a1
-
-
Brass DC type Globe valve
It is suitable for closing and starting with the working medium of water, non corrosive liquid, air, saturated steam and other pipelines.Direct flow fluid has low resistance and is mostly used for fluids with solid particles or high viscosity.