Brief introduction of high temperature and high pressure gate valve: Designed and manufactured in accordance with JB/T3395 and other standards, it can be used with domestic equipment. The middle cavity of the high temperature and high pressure welded gate valve adopts a pressure self-tightening sealing structure. The higher the internal cavity pressure, the better the sealing performance.
Item NO.:
XUVAL77-121Lead Time:
45DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTColor:
SilveryMOQ:
10Z960Y high temperature and high pressure gate valve
The two ends of the branch pipe are welded structures, which are suitable for different requirements of connecting pipes. The sealing surface of the gate and the valve seat is made of stellite cobalt-based cemented carbide surfacing welding, which has good wear resistance, high temperature resistance, corrosion resistance and good scratch resistance. The valve stem has been quenched and tempered and surface nitriding treatment, with good corrosion resistance and scratch resistance. The structure of the opening and closing parts can be designed into different forms such as single plate, double plate, parallel double plate, etc. according to user requirements.
The main features of Z961Y high temperature and high pressure electric gate valve:
(1) The fluid resistance is small. The internal medium channel of the gate valve body is straight, and the medium does not change its flow direction when flowing through the gate valve, so the flow resistance is small.
(2) It is labor-saving to open and close. When opening and closing, the movement direction of the gate is perpendicular to the flow direction of the medium. Compared with the globe valve, the opening and closing of the gate valve is more labor-saving.
(3) The flow direction of the medium is generally not restricted. The medium can flow in any direction from both sides of the gate valve, and both can achieve the purpose of switching on or off. Toilet installation, suitable for pipelines where the flow direction of the medium may change.
Features of Z961Y and Z962Y product structure:
1. Pressure self-tightening connection without bonnet in the middle
2. The gate is a wedge-type elastic single gate or a wedge-type double gate structure
3. Ram/valve seat double-sided overlay welding drill base cemented carbide
4. High temperature creep resistance design
5. The valve stem is made of nitriding precipitation hardening stainless steel
6. There are manual, gear (bevel gear and spur gear) transmission, electric
Main design specification for gate valve of high temperature and high pressure power station:
Design and manufacturing GB/T12234 ASMEB16.34
Structure length JB/T3595
Interface connection size JB/T3595 GB/T12224
Inspection and test JB/T3595 MSS SP61
High temperature and high pressure gate valve
Pressure and temperature reference JB/T3595 ANSI B16.34
Main pressure grades of gate valves for high temperature and high pressure power stations:
Nominal pressure 200, 250, 320
Working pressure P 55 100V, P 55 140V, P 55 170V
Structural advantages of gate valve for high temperature and high pressure power station:
1. It adopts pressure self-tightening seal, and both ends of the valve body branch pipe are welded connection.
2. The valve seat and disc sealing surface are made of cobalt-based cemented carbide plasma spray welding, which has good wear resistance and scratch resistance.
3. The valve stem is treated with anti-corrosive nitriding, which has good anti-corrosion and scratch resistance.
Performance specifications:
Z960H、Z962H、Z960Y、Z962Y-250
Test pressure (MPa)
Working pressure (MPa)
Working temperature (℃)
Applicable medium
Strength test
Seal test/Upper seal test
Z961Y-250
25
37.5
27.5
-
≤425
Water, steam, oil
Z962H-320
32
48
36
-
≤425
Z960Y-P54100
-
30
22
540℃ is 10MPa
≤540
Z962Y-P54170
-
48
36
540℃ is 17 MPa
≤540
Z962H, Z962Y main parts materials:
Part Name
Material designation
Body
WCB
WC6
WC9
Disc
WCB
WC6
WC9
Bonnet
25
12Cr1Mo1VA
Stem
1Cr17Ni2
20Cr1Mo1VA
Seat
25
12Cr1Mo1VA
Seal ring
S mild steel (reinforced flexible graphite)
S mild steel
F mild steel
Filler
Reinforced flexible graphite
Bracket
WCB
WCB or WC6
Stem nut
45(ZCuZn25A16Fe3Mn3)
Four open loop
1Cr13
20Cr1MoVA
Main dimensions of Z960Y and Z962Y high temperature and high pressure gate valves:
Nominal diameter DN
Main external dimensions and connection dimensions (mm)
Electric device
Weight (kg)
d
L
H
L1
L2
100
84
406
1164
437
277
DZW45
234
125
100
483
1402
437
277
DZW60
343
175
158
711
1650
554
309
DZW180
638
225
200
864
1650
554
309
DZW180
654
300
280
1067
2106
764
398
DZW350
1973
Z961H、Z962H、Z962Y-320
100
96
533
1236
437
277
DZW60
291
125
118
610
1302
437
277
DZW60
315
150
148
762
1403
526
283
DZW90
672
175
148
762
1650
554
309
DZW180
684
225
222
1041
1650
554
309
DZW180
696
Z960H、Z961H、Z960Y、Z961Y-P54 100V
175
148
762
1650
554
309
DZW180
683
225
222
1041
1650
554
309
DZW180
704
250
222
1041
1795
554
309
DZW180
1214
300
294
1245
2080
554
309
DZW250
2125
Z961H、Z962H、Z961Y、Z962Y-P54 170V
125
98
630
1230
437
277
DZW60
312
225
186
1060
1680
554
309
DZW180
1401
300
278
1397
2265
764
-
DZW500
2834
325
310
1448
2265
690
398
DZW500
2632
350
338
1550
2536
715
-
DZWC-4
5591
Product Structure:
Packing & Delivery :
Packing Details:all by seaworthy plywood case and packed strongly by packing belt as below
Delivery Details:Generally it is 5-10 days if the goods are in stock. or15-30 days if the goods are OEM or not
enough subject to the order quantity. But anyway, normally, we are able to make sure the delivery will not exceed 45days.
If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported