Cantonese flanged ball valve and gate valve are the same type of valve, the difference is that its closing part is a sphere, and the sphere rotates around the center line of the valve body to open and close a valve. Ball valves are mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. Cantonese ball valve is a new type of valve that has been widely used in recent years. This valve is generally installed horizontally
Item NO.:
XUVAL77-125Lead Time:
45DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTColor:
SilveryMOQ:
10
Product Introduction:
Cantonese flanged ball valve and gate valve are the same type of valve, the difference is that its closing part is a sphere, and the sphere rotates around the center line of the valve body to open and close a valve. Ball valves are mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. Cantonese ball valve is a new type of valve that has been widely used in recent years. This valve is generally installed horizontally
Product Features:
The fluid resistance is small, and its resistance coefficient is equal to that of the pipe section of the same length
Tight and reliable. At present, the sealing surface material of ball valve is widely used plastic, which has good sealing performance and has also been widely used in vacuum system.
The maintenance is convenient, the ball valve has a simple structure, the sealing ring is generally movable, and it is more convenient to disassemble and replace.
Easy to operate, open and close quickly, just rotate 90° from fully open to fully closed, which is convenient for long-distance control.
working principle:
一、Open process
1.In the closed position, the ball is pressed against the valve seat by the mechanical pressure of the valve stem
2.When the handwheel is turned counterclockwise, the valve stem moves in the opposite direction, and its bottom angular flat makes the ball disengage from the valve seat
3.The stem continues to lift and interacts with the guide pins in the helical grooves of the stem, causing the ball to begin to rotate without friction
4.Until it reaches the fully open position, the valve stem is lifted to the limit position, and the ball rotates to the fully open position
二、Close process
1. To close, turn the handle clockwise, the stem begins to descend and the ball leaves the seat to begin to rotate.
2. Continue to rotate the handwheel, the valve stem is acted by the guide pin embedded in the upper spiral groove, so that the valve stem and the ball rotate 90° at the same time.
3. When close to closing, the ball has rotated 90° without contact with the valve seat.
4. During the last few turns of the handwheel, the angular flat at the bottom of the valve stem mechanically wedges against the sphere, making it tightly pressed against the valve seat to achieve a complete seal.
Materials of main parts:
Part Name
Q41F-(16-64)C
Q41F-(16-64)P
Q41F-(16-64)R
Body
WCB
CF8
CF8M
Ball
WCB
CF8
CF8M
Bonnet
304
304
304
Stem
304
304
304
Seal ring
PTEF
Packing gland
PTEF
Main outer size(PN16):
d
d2
L
D
D1
D2
b
f
Z-d1
H
W
DN(mm)
in
15
1/2
10
15
92
95
65
45
14
2
4-14
60
110
20
3/8″
12.6
20
106
75
105
55
14
2
4-14
65
110
25
1″
17
24
109
85
115
65
16
2
4-14
70
110
32
1 1/4″
22
32
126
100
135
78
16
2
4-18
85
145
40
1 1/2″
25
38
136
110
145
85
16
3
4-18
90
145
50
2″
32
46
154
125
160
100
18
3
4-18
98
177
65
2 1/2″
44
60
170
145
180
120
20
3
8-18
110
190
80
3″
50
72
195
160
195
135
22
3
8-18
130
240
100
4″
65
92
215
180
215
155
22
3
8-18
150
260
Specifications:
Nominal pressure:PN1.6,2.5,4.0,6.4MPa
Strength test pressure:PT2.4,3.8,6.0,9.6MPa
Seal test pressure:0.6MPa
Applicable medium:
Q41F-(16-64)C Water,Oil,Gas
Proper temperature:-29~180℃
Q41F-(16-64)P Nitric acid
Q41F-(16-64)R Acetic acid
Packing & Delivery :
Packing Details:all by seaworthy plywood case and packed strongly by packing belt as below
Delivery Details:Generally it is 5-10 days if the goods are in stock. or15-30 days if the goods are OEM or not
enough subject to the order quantity. But anyway, normally, we are able to make sure the delivery will not exceed 45days.
If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported