Product introduction: D671F46 pneumatic wafer butterfly valve with fluorine lining is composed of tetrafluoroethylene sealing butterfly valve, stainless steel valve plate and valve stem. It is suitable for working conditions where the temperature is ≤150℃, weak corrosion or cleanliness has certain requirements, and it is used as the function of regulating flow and intercepting medium in the water supply and drainage and gas pipelines of food, medicine, chemical industry, petroleum, electric power, textile, papermaking, etc. The pneumatic fluorine-lined butterfly valve adopts a PTFE-lined butterfly plate with a spherical sealing surface.
Item NO.:
XUVAL77-120Lead Time:
45DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTColor:
SilveryMOQ:
10D671F46 stainless steel fluorine lined butterfly valve
The valve is easy to operate, tightly sealed, and has a long service life; it can be used to quickly cut off or adjust the flow. It is suitable for occasions requiring reliable sealing and good adjustment characteristics. The valve body adopts a split type, and the sealing at both ends of the valve shaft is controlled by adding fluorine rubber to the rotating base surface between the butterfly plate and the valve seat; to ensure that the valve shaft does not contact the fluid medium in the cavity. Pneumatic wafer-type fluorine-lined butterfly valve is widely used in the transportation of liquid and gas (including steam) in various types of industrial pipelines, and the use of severe corrosive media, such as sulfuric acid, phosphoric acid, strong alkali, aqua regia, etc. Corrosive medium.
Features:
1. Novel and reasonable design, unique structure, light weight, and rapid opening and closing.
2. Small operating torque, convenient operation, labor-saving and dexterous.
3. It can be installed in any position, and the maintenance is convenient.
4. The seals can be replaced, and the sealing performance is reliable to achieve two-way sealing with zero leakage.
5. The sealing material is resistant to aging, corrosion, and has a long service life.
Product advantages:
1. Geared double pistons, large output torque and small volume.
2. The cylinder is made of aluminum gold material, which is light in weight and beautiful in appearance.
3. Manual operating mechanism can be installed on the top and bottom.
4. The rack-and-pinion connection can adjust the opening angle and rated flow.
5. The actuator can be equipped with electrical signal feedback instructions and various accessories to realize automatic operation.
6. IS05211 standard connection provides convenience for product installation and replacement.
7. The joint screws adjusted at both ends can make the standard product have an adjustable range of ±4° between 0° and 90°. Ensure the synchronization accuracy with the valve.
Technical parameter:
DN(mm)
50~1600
PN(MPa)
0.6
1.0
1.6
Seal test (MPa)
0.66
1.1
1.76
Strength test (MPa)
0.9
1.5
2.4
Proper temperature
Fluorine rubber: -20℃~200℃
Applicable medium
Water, air, natural gas, oil and weakly corrosive fluids
Leak rate
Comply with GB/T13927-92 standard
Drive method
Pneumatic
Configure the actuator
GT, AT, AW series single and double acting pneumatic actuators
Control method
Two switch control, 4~20mA analog signal control
Adopt standard:
Design standard: GB/T2238-1989
Flange connection size: GB/T9113.1-2000; GB/T9115.1-2000; JB78
Structure length: GB/T12221-1989
Pressure test: GB/T13927-1992; JB/T9092-1999
Parts materials:
Part Name
Material
Body
Nodular cast steel, cast steel, alloy steel, stainless steel
Butterfly board
Gray cast iron, ductile cast steel, cast steel, stainless steel and special materials
Sealing ring
Various rubber, PTFE
Stem
2Cr13, stainless steel
Filler
O-ring, flexible graphite
Outline structure drawing:
Packing & Delivery :
Packing Details:all by seaworthy plywood case and packed strongly by packing belt as below
Delivery Details:Generally it is 5-10 days if the goods are in stock. or15-30 days if the goods are OEM or not
enough subject to the order quantity. But anyway, normally, we are able to make sure the delivery will not exceed 45days.
If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported