FT44H lever floating ball steam trap valve

CS41H-16, CS41H-16C, CS41-25, CS41-40 free floating ball steam trap: flange connection, floating ball structure, valve seat sealing surface material is Cr13 series stainless steel, nominal pressure PN16~PN40, valve body material is cast iron (CS41H-16), carbon steel (CS41H-16C, CS41-25, CS41-40) steam trap. Used for steam heating equipment, steam pipeline network, and condensate recovery system, it can quickly, automatically, and continuously discharge condensate, effectively preventing steam leakage. Working principle: The free floating ball steam trap utilizes the principle of buoyancy. The floating ball rises and falls according to the amount of condensed water, and changes with the water level. It automatically adjusts the opening of the valve seat hole to continuously discharge condensed water. When condensed water stops entering, the floating ball drops to the bottom and returns to the closed position, stopping drainage. As the drainage valve seat hole is always below the condensed water level, it forms a water seal, water, and gas natural separation, achieving no steam leakage. Product features: ① It can expand the saturation of condensed water, and the receipt equipment does not contain water that accumulates first, thereby obtaining heating efficiency. ② When the steam pressure changes, it is not affected and can continuously work with stable performance The steam leakage is unpredictable and small, manufactured using grinding technology, with high float accuracy and good sealing performance Good automatic air exhaust performance. ⑤ Long service life, the entire spherical surface of the float can be used as a sealing surface without concentrated wear and tear

H44H, H44W, and H44Y swing check valves refer to valves that automatically open and close the valve disc based on the flow of the medium itself, to prevent medium backflow. They are also known as check valves, one-way valves, backflow valves, and backpressure valves. A check valve is an automatic valve that primarily functions to prevent media backflow, prevent pump and drive motor reversal, and discharge container media.

Stainless steel pneumatic diaphragm pump is currently the most innovative type of pump in China. For various corrosive liquids, liquids with particles, high viscosity, volatile, flammable, and highly toxic liquids, they can all be pumped and absorbed completely.

This series of pressure reducing valves belongs to the pilot piston pressure reducing valve. It consists of two parts: the main valve and the pilot valve. The main valve is mainly composed of valve seat, disc, piston, cylinder liner, and spring parts. The pilot valve mainly consists of valve seat, valve disc diaphragm, spring, adjustment spring, and other components. This product has made significant improvements on the basis of ordinary pressure reducing valves, increasing the piston area, changing the throttling structure, changing the sealing form, increasing the flow area, etc., thereby greatly improving performance in improving steam pipeline, flow rate, service life, and other aspects. This product is mainly used in steam pipelines, suitable for steam pipelines with large changes in flow rate and inlet pressure.

The YS-10A pump is a radial suction type high-temperature medium transfer circulating vortex pump. The transfer medium is a liquid without particles or fibers, characterized by small volume, exquisite appearance, high flow rate, and stable performance.

Security type filters are an indispensable device on medium pipelines, usually installed at the inlet of pressure reducing valves, pressure relief valves, constant water level valves, or other equipment to eliminate impurities in the medium and protect the normal use of valves and equipment. When the fluid enters the filter cartridge with a certain specification of filter screen, its impurities are blocked, and the clean filtrate is discharged from the filter outlet. When cleaning is needed, simply remove the detachable filter cartridge, process it, and reinstall it. Therefore, maintenance is extremely convenient.

Overview of pneumatic lined fluorine butterfly valve: The pneumatic fluorine-lined butterfly valve adopts a PTFE-lined butterfly plate with a spherical sealing surface. The valve is easy to operate, tightly sealed, and has a long service life; it can be used to quickly cut off or adjust the flow. Suitable for occasions requiring reliable sealing and good adjustment characteristics. The valve body adopts a split type, and the sealing at both ends of the valve shaft is controlled by the rotating base surface between the butterfly plate and the valve seat and fluorine rubber to ensure that the valve shaft does not contact the fluid medium in the cavity.

The Y-type filter is an indispensable filter device in the pipeline system of conveying medium. The Y-type filter is usually installed in the inlet of the pressure reducing valve, pressure relief valve, water level valve or other equipment to remove impurities in the medium, in order to protect the normal use of the valve and equipment.

fe gate valve, also known as knife gate valve, knife type slurry valve, its opening and closing part is a gate, the movement direc.