Stainless steel pneumatic diaphragm pump is currently the most innovative type of pump in China. For various corrosive liquids, liquids with particles, high viscosity, volatile, flammable, and highly toxic liquids, they can all be pumped and absorbed completely.
Item NO.:
XUVAL33-340Lead Time:
45 DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTColor:
silveryMOQ:
10Safe and reliable with a wide range of applications
In the two symmetrical working chambers of the diaphragm pump, each is equipped with an elastic diaphragm. The connecting rod connects the two diaphragms into one, and compressed air enters the distribution valve from the pump's inlet joint, pushing the diaphragms in the two working chambers to drive the two diaphragms connected by the connecting rod to move synchronously. At the same time, the gas in the other working chamber is discharged from behind the diaphragm outside the pump. Once reaching the end of the journey. The valve distribution mechanism automatically introduces compressed air into another working chamber, pushing the diaphragm to move in opposite directions, thus forming synchronous reciprocating motion of the two diaphragms. There are two one-way ball valves installed in each working chamber. The reciprocating movement of the diaphragm causes a change in the volume of the working chamber, forcing the two one-way ball valves to open and close alternately, thereby continuously sucking and discharging liquid.
Performance Overview:
1. No need for water diversion. The suction head can reach up to 5m, the head can reach 50m, and the outlet pressure is ≥ 6kgf/c ㎡;
2. The flow is spacious and the passing performance is good. It allows for a maximum particle diameter of 10mm to pass through. When pumping mud and impurities, there is minimal wear on the pump;
3. The head and flow rate can be continuously adjusted through the opening of the air valve (with air pressure adjusted between 1-7 bar):
4. The pump has no rotating parts, no shaft seals, and the medium pumped by the diaphragm is completely separated from the moving parts and workpiece medium of the pump, so the medium conveyed will not leak outward. So when pumping toxic, easily exploitable or corrosive media, it will not cause environmental pollution and endanger personal safety;
5. No need to use electricity. It is safe and reliable to use in flammable and explosive places;
6. Can work submerged in media:
7. Convenient to use, reliable in operation, and simple opening and closing of gas valves for start and stop. Even if the pump runs without medium for a long time or suddenly stops due to unexpected circumstances, it will not be damaged. Once overloaded, the pump will automatically stop, with self-protection performance. When the load returns to normal, it can automatically start and run again;
8. The pump has a simple structure and fewer vulnerable parts. It is easy to install and maintain, and the medium conveyed by the pump will not come into contact with moving parts such as the distribution valve and connecting rod. Unlike other types of pumps, the performance gradually decreases due to the wear of components such as rotors, pistons, gears, and blades
9. Can transport sticky liquids (with a viscosity below 10000 centipoises):
10.This pump does not require oil lubrication, and even when idling, it has no impact on the pump, which is the biggest feature of this pump.
If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported