The product is suitable for the transportation of liquids and gases (including steam) in various industrial pipelines. After selection, it can also be used in special media such as chlorine, oxygen, high vacuum, sulfur resistant or corrosive media. The product can also have a fireproof structure for selection. Adopting a double eccentric butterfly 1
Ansi b16.5 150lb American standard flange, also known as flange plate or flange plate. A flange is a component that connects pipes to each other and is connected to the end of the pipe; Also useful is the flange on the inlet and outlet of the equipment, used for the connection between two devices before. Flange connection or flange joint refers to 1
Electric ball valves are important actuators in industrial automation control systems. Electric ball valves are valves that rotate around the axis of the valve stem based on the movement of the valve disc. The change in the valve seat opening is directly proportional to the valve disc stroke. It is mainly used to cut off or connect the medium in pi1
The inverted bucket steam trap is a reliable, efficient, and energy-saving trap. The inverted bucket steam trap is based on the working principle of Density contrast between condensed water and steam, and its internal structure is connected to the inverted bucket by a lever system. The inverted bucket steam trap valve is usually used in systems tha1
This series of pressure reducing valves belongs to the pilot piston pressure reducing valve. It consists of two parts: the main valve and the pilot valve. The main valve is mainly composed of valve seat, disc, piston, cylinder liner, and spring parts. The pilot valve mainly consists of valve seat, valve disc diaphragm, spring, adjustment spring, an1
Advantages: Necked flat welding flanges are also classified as flat welding flanges, as they have a short neck, which improves the strength of the flange and improves its load-bearing capacity. So it can be used on higher pressure official roads. Disadvantages: Compared to plate type flat welding flanges, they have a higher cost and are more prone 1
The self operated pressure regulating valve series products have three structures: single seat (ZZYP), sleeve (ZZYM), double (ZZYN), and so on; There are two types of actuators: membrane type and piston type; There are two types of functions: pressure regulation after the valve for pressure reduction (Type B) and pressure regulation before the valv1
Knife gate valve, also known as knife gate valve, knife gate gate valve, slurry valve, and mud valve, has a gate as its opening and closing component. The direction of movement of the gate is perpendicular to the direction of the fluid, and the medium is cut off by a blade shaped gate that can cut fiber materials. The gate has two sealing surfaces,1