30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Dark Stem Bronze buckle gate valve
Main materials of Z15W bronze buckle gate valve are tin bronze C83600, aluminum bronze C95800 and nickel aluminum bronze C95500, etc. The packing and seat seal are made of polytetrafluoroethylene and fluororubber, and the manufacturing standard of internal thread is G thread, BSP thread and NPT thread.Suitable medium: suitable for fresh water, seaw1
-
Bronze wire clasp globe valve
Bronze globe valves are valves with a shutoff valve (disc) moving along the center line of the seat.Depending on this movement of the disc, the variation of the seat orifice is proportional to the disc travel.Due to the relatively short stem opening or closing stroke of this type of valve, and the very reliable cutting function, and the seat port c1
-
Bronze high-rod screw gate valve
Internal thread gate valve, also known as closure door, is the most widely used one of the valves, belongs to the forced sealing valve, its closure principle is, depending on the pressure of the valve bar, the disc sealing face and seat sealing face tight fit, to prevent the flow of media.It is divided into several categories in different ways.The 1
-
-
-
Bronze internal thread Y type strainer
Screw filter is an indispensable device for conveying medium pipelines, usually installed in the pressure relief valve, pressure relief valve, water level valve or other equipment at the end of the inlet, used to eliminate impurities in the medium, in order to protect the normal use of the valve and equipment.
-
-
Two way flange type plug valve
X43W|X43T type plug valve is suitable for opening and closing of water, oil, gas and other medium pipelines with nominal pressure of 0.6-1.0mpa and temperature ≤100℃
-
Three way flange type plug valve
Plug valves are shutoff or plunger shaped rotary valves that open or close a valve by rotating 90 degrees so that the port on the plug is identical to or separate from the port on the body.