Heat dissipation and venting flame arrester

Overview of ZGB-1 corrugated flame arrestor: The ZGB-1 new corrugated oil storage tank flame arrestor is a new product designed by the Beijing Design Institute of China Petrochemical Corporation. It has been tested and qualified by the Tianjin Fire Science Research Institute of the Ministry of Public Security according to the GB5908-86 standard of the People's Republic of China. The flame arrestor is widely used in petroleum storage tanks. To prevent accidental fire from entering the tank and prevent accidents, the flame arrestor is an ideal product for fire protection of storage tanks.

Overview of pipeline flame arrester: Pipeline flame arrester, also known as fire arrester, is to prevent external flames from entering equipment and pipelines containing flammable and explosive gases or to prevent flames from spreading between equipment and pipelines. It is a safety device used to prevent hydrogen flames from spreading outwards. It is composed of a solid material (fire-stop element) that can pass gas and has many small channels or gaps.

The ZSJZ series water flow indicator is used for automatic sprinkler water extinguishing systems. It can be installed on the main water supply pipe or branch pipe to provide an electrical signal of water flow in a certain area. This electrical signal can be sent to the electric control box or used to start the control switch of the fire pump. The water flow indicator series products produced include ZSJZ (Type A) with delay circuit and ZSJZ (Type B) without delay circuit. Each model comes in seven specifications: 50, 65, 80, 100, 125, 150, and 200, suitable for use in different pipelines. The water flow indicator with a delay circuit is set to 4S when leaving the factory. If other times are needed, our company can provide loans as required. Connection methods: pipe thread, welding, flange, and saddle are available for users to choose from.

Pipeline flame arresters, also known as fire extinguishers, are designed to prevent external flames from entering equipment or pipelines containing flammable and explosive gases, or to prevent flames from spreading between equipment and pipelines. It is a safety device used to prevent the outward spread of hydrogen flames, composed of a solid material (flame retardant element) that can pass through gas and has many small channels or gaps. Pipeline explosion-proof flame arrester is a safety device used to prevent the spread of flammable gases and liquids, and to prevent explosions caused by backfire. Usually installed on pipelines that transport or discharge flammable and explosive gases. Such as torches, heating combustion systems, petroleum gas recovery systems, or other flammable gas systems.

Natural gas flame arresters are designed and manufactured based on the principle of extinguishing flames due to heat loss when they pass through narrow pores in thermal conductors. They are suitable for storage and flare systems of combustible gas pipelines, such as gasoline, kerosene, light diesel, benzene, methyl benzene, crude oil and other oil products, gas purification systems, gas analysis systems, coal mine gas emission systems, heating furnace fuel gas pipeline networks, and can also be used as pipeline supplies for acetylene, oxygen, nitrogen, and natural gas. This valve can be used in conjunction with a breathing valve or alone.

Drawer type flame arrester is a safety device used to prevent the spread and backfire of flammable gases and liquids from causing explosions. It is usually used on storage tanks or pipelines that transport or discharge flammable and combustible gases, such as torches, heated combustion systems, petroleum gas recovery systems, or other flammable gas systems.

Usually installed on storage tanks and pipelines for transporting or discharging flammable and explosive gases, it is a safety device used to prevent the flames of flammable gases and liquids and prevent explosions caused by flashback. It can be used in torches, heating combustion systems, petroleum gas recovery systems, or other flammable gas systems.

Natural gas flame arresters are designed and manufactured based on the principle that flames extinguish due to heat loss when passing through narrow pores in thermal conductors. Suitable for storage and flare systems, gas purification systems, gas analysis systems, coal mine gas emission systems, heating furnace fuel gas pipelines for combustible gas pipelines, such as gasoline, kerosene, light diesel, benzene, methyl benzene, crude oil and other oil products, as well as pipeline supplies for acetylene, oxygen, nitrogen, and natural gas. This valve can be used in conjunction with a breathing valve or as a standalone device.

This ball valve has the characteristics Compact structure, reliable sealing, simple structure and easy maintenance.