Full Port Ball valves
Ball valve and plug valve belong to the same type of valve, with only its closing part being a sphere. The sphere rotates around the centerline of the valve body to achieve opening and closing. Ball valves are mainly used in pipelines to cut off, distribute, and change the flow direction of the medium. Ball valve is a new type of valve widely used in recent years, which has the following advantage...
Ball valve and plug valve belong to the same type of valve, with only its closing part being a sphere. The sphere rotates around the centerline of the valve body to achieve opening and closing. Ball valves are mainly used in pipelines to cut off, distribute, and change the flow direction of the medium. Ball valve is a new type of valve widely used in recent years, which has the following advantage...
The installation of safety valves and the key points of pipeline layout design 1. The safety valve should be installed upright and close to the protected equipment or pipeline. If the arrangement cannot be approached, the total pressure drop of the pipeline from the protected equipment or pipeline to the inlet of the safety valve should not exceed 3% of the fixed pressure value of the safety valve...
Ball valve is a common type of valve, and its design characteristics make it widely used in various industrial applications. Ball valves are favored for their simplicity, reliability, and ease of operation, playing an important role in fluid control. The main components of a ball valve include a sphere with a diameter and inlet and outlet pipes located on both sides of the sphere. Spheres are usua...
At present, the commonly used hardening processes for the surface of metal hard sealed ball valves mainly include the following: (1) Surface welding (or spray welding) of hard alloy on the sphere can achieve a hardness of over 40HRC. The process of surface welding of hard alloy on the sphere is complex, with low production efficiency, and large area welding can easily cause deformation of the part...
How to choose valve plasma welding equipment? Background of valve overlay welding Scratches, erosion, and corrosion can all damage the valve sealing surface. The composition and metal structure of sealing materials, surface treatment process, hardness and hardness difference, specific pressure and conformity, and many other factors can all affect the quality of valve sealing surfaces. Each type of...
At present, the commonly used hardening processes for the surface of metal hard sealed ball valves mainly include the following: (1) Surface welding (or spray welding) of hard alloy on the sphere can achieve a hardness of over 40HRC. The process of surface welding of hard alloy on the sphere is complex, with low production efficiency, and large area welding can easily cause deformation of the part...
Maintaining the worm gear ball valve can extend its service life and ensure its normal operation. The following is the correct maintenance method for worm gear ball valves: 1、 Regular inspections: Regularly inspect the appearance and working condition of the ball valve, and promptly handle any damage or abnormal situations. Meanwhile, check if the fastening bolts of the valve are loose and if ther...
(1) The installation position of the regulating valve should meet the requirements of the process flow design, and should be close to the primary indicating instrument related to it, so that the primary instrument can be observed when manually operating the bypass valve; (2) The regulating valve should be arranged on the ground or platform and easy to operate and maintain; (3) The regulating valve...
Categories
Recent Posts
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported