Product Introduction DL vertical multi-stage centrifugal pump is a hydraulic model using efficient and energy-saving product IS pump, which is a vertical multi-stage multi-segment structure. The screw clamps the inlet section, middle section, and outlet section together. Each stage of the water pump is equipped with an impeller and a guide vane. Th1
The YS-10A pump is a radial suction type high-temperature medium transfer circulating vortex pump. The transfer medium is a liquid without particles or fibers, characterized by small volume, exquisite appearance, high flow rate, and stable performance.
The inverted bucket steam trap is a reliable, efficient, and energy-saving trap. The inverted bucket steam trap is based on the working principle of Density contrast between condensed water and steam, and its internal structure is connected to the inverted bucket by a lever system. The inverted bucket steam trap valve is usually used in systems tha1
The self operated pressure regulating valve series products have three structures: single seat (ZZYP), sleeve (ZZYM), double (ZZYN), and so on; There are two types of actuators: membrane type and piston type; There are two types of functions: pressure regulation after the valve for pressure reduction (Type B) and pressure regulation before the valv1
Knife gate valve, also known as knife gate valve, knife gate gate valve, slurry valve, and mud valve, has a gate as its opening and closing component. The direction of movement of the gate is perpendicular to the direction of the fluid, and the medium is cut off by a blade shaped gate that can cut fiber materials. The gate has two sealing surfaces,1
The fully lined rubber and fluorine lined flange butterfly valve has a simple structure, small volume, and light weight, and is only composed of a few parts. Moreover, the valve can be quickly opened and closed by rotating it 90 °, with simple operation and excellent fluid control characteristics. When the butterfly valve is in the fully open posit1
Product Usage The PZ973H electric knife gate valve series products are widely used in various industrial fields, especially in mining and steel industries - used for coal, filter slurry, purification devices - used for wastewater, mud, dirt, and clarified water with suspended solids, paper industry - used for any concentration of pulp, feed water m1
Pressure regulating valve is an actuator product that does not require external energy. Can be used for nominal pressures PN01, PN10. Differential (micro) pressure can be adjusted in stages. From 50mm. W. C to 0.1MPa. It has a wide range of uses and can be used in industrial combustion furnace systems to control the ratio of two materials, such as 1
In pipeline systems, elbows are fittings that change the direction of the pipeline. According to angles, there are three most commonly used types: 45 ° and 90 ° and 180 °. In addition, according to engineering needs, there are also other abnormal angle elbows such as 60 °. The materials of elbows include cast iron, stainless steel, alloy steel, mal1