The most prominent feature is that the diaphragm separates the inner cavity of the lower valve body from the inner cavity of the upper valve cover, preventing the valve stem, valve disc, and other parts located above the diaphragm from medium corrosion, eliminating the packing sealing structure, and avoiding medium leakage. 1. Diaphragms made of so1
Electromagnetic valve is an industrial equipment controlled by electromagnetic, which is an automation basic component used to control fluids. It belongs to the actuator and is not limited to hydraulic or pneumatic systems. It is used in industrial control system to adjust the direction, flow, speed and other parameters of medium. The solenoid valv1
The exhaust valve is used for pipeline exhaust in independent heating systems, centralized heating systems, heating boilers, central air conditioning, floor heating, and solar heating systems. Because water usually contains a certain amount of air, and the solubility of air decreases with the increase of temperature, gas gradually separates from th1
A magnetic lock valve is a type of magnetic lock that relies on the force of magnetic force to control the opening and closing of the closing components inside the valve. It is generally used on valves with important, special positions and functions to prevent the valve from being opened or closed arbitrarily. No gaps, anti clogging, waterproof, an1
A shut-off valve refers to a valve where the closing element (disc) moves along the centerline of the valve seat. According to the movement of the valve disc, the change in the valve seat opening is directly proportional to the valve disc stroke. Due to the relatively short opening or closing stroke of the valve stem and the highly reliable cut-off1
The brass ball valve evolved from the plug, and its opening and closing parts act as a ball, using the ball to rotate 90 degrees around the axis of the valve stem to achieve the purpose of opening and closing. It has the characteristics of fast opening and closing, lightweight, simple structure, small volume, good sealing performance, and low fluid1
The handle groove butterfly valve has a simple structure, excellent performance, and is widely used. Mainly used for shut-off valves, this product can be installed as a regulating and shut-off device on all corrosive and non corrosive gases, liquids, semi fluids, as well as solid powder pipelines and containers in petroleum, chemical, food, pharmac1
The HL44X full flow anti clogging valve is designed and produced by introducing advanced foreign technology. This valve is widely applicable to the inlet end of pipelines such as water supply systems and sewage systems. Its characteristic is that the flow is large (full flow), and its structure is novel and unique. By operating the pull rod, the me1
Signal gate valves are often used in automatic sprinkler fire pipeline systems to monitor water supply management and can remotely indicate valve opening. Rising stem gate valves and attached opening indicating gate valves are also commonly used in fire protection systems. If the gate valve is installed at a higher position from the ground, the ris1