The Q41F soft sealed ball valve not only has a simple structure and good sealing performance, but also has a small volume, light weight, low material consumption, small installation size within a certain nominal diameter range. It also has a small driving torque, simple operation, and is easy to achieve fast opening and closing. It is one of the fa1
Q47H ash discharge ball valve/Q947H electric ash discharge ball valve/Q647H pneumatic ash discharge ball valve are used in the extraction, refining, processing, and pipeline transportation systems of petroleum, natural gas, coal, and ore; In the production of chemical products, pharmaceuticals, and food; In the power production systems of hydropowe1
Low temperature valves refer to valves that can be used under low temperature conditions. Valves with operating temperatures below -40 ℃ are usually referred to as low-temperature valves. Low temperature valves include low-temperature ball valves, low-temperature gate valves, low-temperature globe valves, low-temperature butterfly valves, low-tempe1
The HQ41X ball type ball check valve adopts a rubber wrapped ball as the valve disc. Under the action of the medium, it can roll up, down, left and right on the integral slide inside the valve body to open or close the valve. Silent closure, no water hammer generated, good sealing performance. The valve body adopts a full water flow channel, with h1
Product Introduction: 1、 Product Description: Product Model: Q347F/H/Y Product Name: Q347 Fixed Worm Gear Ball Valve Split and Three Section Fixed Ball Valves, also known as Side Mount Split Ball Valves, divide the valve body into asymmetrical sections along the axis perpendicular to the valve channel
D41W ventilation butterfly valve/D341W worm gear ventilation butterfly valve/D641W pneumatic ventilation butterfly valve/D941W electric ventilation butterfly valve is made of the same material as the valve body and processed into a sealing ring. Its applicable temperature depends on the material selection of the valve body, and the nominal pressure1
Pneumatic knife gate valve, also known as pneumatic knife gate valve, pneumatic knife gate gate valve, pneumatic slurry valve, and pneumatic mud valve, has a gate as its opening and closing component. The direction of movement of the gate is perpendicular to the direction of the fluid, and the medium is cut off by a blade shaped gate that can cut f1