Knife gate valve, also known as knife gate valve, knife gate gate valve, slurry valve, and mud valve, has a gate as its opening and closing component. The direction of movement of the gate is perpendicular to the direction of the fluid, and the medium is cut off by a blade shaped gate that can cut fiber materials. The gate has two sealing surfaces,1
Product Overview The V230 series self operated pressure regulating valve is an energy-saving control valve that relies on the pressure of the medium itself and does not require external energy for self control. It is used as a pressure control device for gases, liquids, and steam temperatures (≤ 350C) and other media. Product Features Maintenance-f1
The fully lined rubber and fluorine lined flange butterfly valve has a simple structure, small volume, and light weight, and is only composed of a few parts. Moreover, the valve can be quickly opened and closed by rotating it 90 °, with simple operation and excellent fluid control characteristics. When the butterfly valve is in the fully open posit1
This series of proportional pressure reducing valves is a regulating valve that proportionally reduces the pressure of the medium flowing through it. It utilizes the pressure generated by the different cross-sectional areas of the piston at both ends inside the valve body to change the pressure behind the valve and achieve the purpose of reducing p1
There are two types of actuators: membrane type and piston type; There are two types of functions: post valve pressure regulation for pressure relief (B-type) and pre valve pressure regulation for pressure relief (K-type). The nominal pressure ratings of products include PN16, 40, and 64; Valve body diameter range DN20~300; There are three levels o1
Pressure regulating valve is an actuator product that does not require external energy. Can be used for nominal pressures PN01, PN10. Differential (micro) pressure can be adjusted in stages. From 50mm. W. C to 0.1MPa. It has a wide range of uses and can be used in industrial combustion furnace systems to control the ratio of two materials, such as 1
In pipeline systems, elbows are fittings that change the direction of the pipeline. According to angles, there are three most commonly used types: 45 ° and 90 ° and 180 °. In addition, according to engineering needs, there are also other abnormal angle elbows such as 60 °. The materials of elbows include cast iron, stainless steel, alloy steel, mal1
A concentric reducer is a type of pipe that is directly welded to a steel pipe. The main manufacturing standards for concentric reducers are generally GB/T12459, GB/T13401, ASME B16.9, SH3408, SH3409, HG/T21635, HG/T21631, and SY/T0510. Corresponding to the concentric reducer, there are also eccentric reducers made of carbon steel, alloy steel, and1
Equal diameter cross, commonly referred to as a professional term, refers to pipe fittings and pipeline connectors, used in main pipelines where branch pipes are required. Equal diameter cross is a type of cross, which can be divided into two types: general equal diameter cross and differential diameter cross. Named because the four ends can be con1