Ripple compensator, also commonly known as expansion joint or expansion joint. It is composed of corrugated pipes (a type of elastic element) and accessories such as end pipes, brackets, flanges, and conduits that make up the main body of its work. A corrugated compensator is a type of compensation element that utilizes the effective expansion and contraction deformation of its working body corrugated pipe to absorb dimensional changes caused by thermal expansion and contraction of pipelines, conduits, containers, etc., or to compensate for axial, lateral, and angular displacement of pipelines, conduits, containers, etc. It can also be used for noise reduction and vibration reduction. Ripple compensator, also commonly known as expansion joint or expansion joint. Composed of corrugated pipes (an elastic element) and accessories such as end pipes, brackets, flanges, and conduits, which constitute the main body of its work, it is a compensation device that utilizes the effective expansion and contraction deformation of the elastic element of the corrugated compensator to absorb the dimensional changes caused by thermal expansion and contraction of pipelines, conduits, or containers. It belongs to a type of compensation element. It has absorption for axial, lateral, and angular displacement, so it is widely used in modern industry.
Item NO.:
XUVAL-391Lead Time:
45Product Orgin:
CHINABrand:
XUVALShipping Port:
Shang haiPayment:
100%Color:
redMOQ:
1Before installation, the compensator should be checked for its model, specifications, and pipeline configuration, which must meet the design requirements; For compensators with inner sleeves, attention should be paid to aligning the direction of the inner sleeve with the flow direction of the medium; Compensators that require "cold tightening" and auxiliary components used for pre deformation should be removed after the pipeline installation is completed; It is strictly prohibited to use the deformation method of corrugated compensators to adjust the installation deviation of pipelines, in order to avoid affecting the normal function of compensators, reducing their service life, and increasing the load on pipeline systems, equipment, and supporting components; During the installation process, welding slag is not allowed to splash onto the surface of the wave shell, and other mechanical damage to the wave shell is not allowed; After the installation of the piping system is completed, the yellow auxiliary positioning components and fasteners used for installation and transportation on the corrugated compensator should be removed as soon as possible, and the limiting device should be adjusted to the specified position according to the design requirements, so that the piping system has sufficient compensation capacity under environmental conditions; All moving components of the compensator shall not be stuck or restricted by external components, and the normal operation of each moving part shall be ensured; The insulation material in contact with the bellows of the compensator should not contain chlorine.
If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported