Pipe cap, also known as head, plug, cap, pipe cap, or blind, is a pipe fitting welded to the pipe end or installed on the external thread of the pipe end to cover the pipe. Used to close pipelines, with the same effect as pipe plugs. The form of blind plates is similar, except that blind plates can be dismantled for sealing, while welded pipe caps 1
Bend pipes are bent using a complete set of bending molds, which are divided into two processes: cold bending and hot pushing. Regardless of the type of machine equipment and pipeline, most of them use bent pipes, mainly for oil, gas, infusion, and other purposes. Classification: According to the production method, it can be divided into pushing, p1
The most prominent feature is that the diaphragm separates the inner cavity of the lower valve body from the inner cavity of the upper valve cover, preventing the valve stem, valve disc, and other parts located above the diaphragm from medium corrosion, eliminating the packing sealing structure, and avoiding medium leakage. 1. Diaphragms made of so1
A shut-off valve refers to a valve where the closing element (disc) moves along the centerline of the valve seat. According to the movement of the valve disc, the change in the valve seat opening is directly proportional to the valve disc stroke. Due to the relatively short opening or closing stroke of the valve stem and the highly reliable cut-off1
Gate valve refers to a valve whose opening and closing body (valve plate) is driven by the valve stem to lift the sealing surface of the valve seat, which can connect or cut off the passage of fluid. When the valve is partially opened, eddy currents are generated on the back of the gate, which can easily cause erosion and vibration of the gate, and1
The HL44X full flow anti clogging valve is designed and produced by introducing advanced foreign technology. This valve is widely applicable to the inlet end of pipelines such as water supply systems and sewage systems. Its characteristic is that the flow is large (full flow), and its structure is novel and unique. By operating the pull rod, the me1
Electromagnetic valve is an industrial equipment controlled by electromagnetism, which is an automation basic component used to control fluids. It belongs to the actuator and is not limited to hydraulic or pneumatic systems. It is used in industrial control system to adjust the direction, flow, speed and other parameters of medium. The solenoid val1
The solenoid valve has a sealed chamber with through holes at different positions, each connected to a different oil pipe. The middle of the chamber is a piston, and there are two electromagnets on both sides. The magnetic coil on which side is energized will attract the valve body to which side. By controlling the movement of the valve body, diffe1
Blind flange, also known as blind flange, is officially called flange cover. It is a flange without a hole in the middle, used to seal pipeline plugs. There are many types of sealing surfaces, including flat, convex, concave convex, tenon groove, and ring connection surfaces.