Forged blind BL flange

Ansi b16.5 150lb American standard flange, also known as flange plate or flange plate. A flange is a component that connects pipes to each other and is connected to the end of the pipe; Also useful is the flange on the inlet and outlet of the equipment, used for the connection between two devices before. Flange connection or flange joint refers to a detachable connection consisting of flanges, gaskets, and bolts connected to each other as a combination sealing structure. Pipeline flange refers to the flange used for piping in pipeline devices, and when used on equipment, it refers to the inlet and outlet flanges of the equipment. There are holes on the flange, and bolts make the two flanges tightly connected. Sealing between flanges with gaskets.

Advantages: Necked flat welding flanges are also classified as flat welding flanges, as they have a short neck, which improves the strength of the flange and improves its load-bearing capacity. So it can be used on higher pressure official roads. Disadvantages: Compared to plate type flat welding flanges, they have a higher cost and are more prone to collision during transportation due to their shape characteristics.

ISG/IHG vertical pipeline centrifugal pump，It is a combination of excellent hydraulic models selected by domestic water pump experts, using the performance parameters of IS centrifugal pumps, and cleverly designed on the basis of ordinary vertical pumps. At the same time, suitable hot water, high temperature, and corrosive chemical pumps and oil pumps are dispatched on the basis of ISG type according to different usage temperatures, media, etc. It has the advantages of high efficiency, energy conservation, low noise, and reliable performance.

200X pressure reducing valve is a kind of valve used for parallel connection of fire water and domestic water in the water supply system, used to allocate the direction of water supply.

Forged steel gate valves are available in three bonnet designs.The first is the bolted bonnet.The second design is the welded bonnet.The third is a self-sealing bonnet.

Features: 1. Direct pull diaphragm type. 2. Zero pressure start, suitable for low-pressure systems. Media: air, gas, water, etc Fluid temperature: nitrile rubber: -5 ℃~80 ℃ EPDM adhesive: -5 ℃~100 ℃ Fluorine rubber: -5 ℃~120 ℃ Pressure: 0.~1.0MPa Connection dimensions: 3/8 ", 1/2", 3/4 ", 1", 11/4 ", 11/2", 2 ", Thread: G thread, NPT thread Diameter (mm): 10,15,20,25,32,40,50 Voltage: (DC) 12V, 24V (AC) 24V, 120V, 240V/60Hz; 110V, 220V/50Hz

This product is easy to install and consists of highly forged brass. Simply insert copper, CPVC or PEX tubing and the stainless steel teeth will bite and hold tight while the specially formulated O-ring compresses to create a perfect seal.

Universal socket welding (US) check valve designed for minimum pressure drop. It carries sturdy and reliable inspection - all ® Decoration and selection of various seat materials and cracking pressure. The socket end is machined to ASME/ANSI B16.11 size. American valves can also be used as low-pressure safety valves or vacuum circuit breakers with the required spring settings.

Flange pressure reducing valve from the general thread of the pressure reducing valve, its connection flange, this is a control valve in the body of the opening of the opening and closing of regulating the flow of medium, the medium pressure is reduced, at the same time with the aid of the role of the valve after pressure adjust the opening of open-close part, keep the valve after pressure within a certain range, under the condition of the inlet pressure changing, keep the outlet pressure within the scope of the set, protection appliances for production from then on.